A key sticks halfway down on a Monday morning, and mechanical keyboard repair starts with that one switch. Lift the keycap, pull the switch, and seat a new one without touching a soldering iron. The steps below walk through each part, with the tools that handle it.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Mechanical keyboard repair on a hot-swappable board means pulling the keycap, pulling the switch with a switch puller, and pressing a new switch into place. No soldering is needed when the board is hot-swappable, and the Vtyzcm kit (on Amazon) states its tools remove components without soldering or specialized equipment. Work with the board unplugged, keep the pulled switches and keycaps in one place, and check that the new switch seats flat before you type on it.
Step 1: Unplug the keyboard and clear the desk
Unplug the keyboard and set it on a clear desk surface with room for the pulled keycaps and switches. Keep a small tray nearby so nothing rolls away. The GATERON Twins tool (on Amazon) holds the switch and keycap after pulling, which keeps small parts from getting lost on the desk.
Step 2: Pull the keycap
Fit a keycap puller over the keycap and lift straight up. A 2-in-1 tool such as the GATERON Twins or the QORVANILEX puller (on Amazon) handles this step with the same tool that pulls the switch, while the Vtyzcm kit includes dual-style keycap pullers for the same job. Set each keycap aside in row order so the board goes back together the same way.
Step 3: Pull the switch
Fit the switch puller around the switch, squeeze the arms, and lift straight up. The GLORIOUS puller (on Amazon) uses reinforced arms the maker calls bend-proof, and the QORVANILEX puller uses a four-claw head to spread pressure around the switch body. Pull straight up, since a sideways pull can bend the pins on the switch.
Step 4: Seat the new switch
Line the pins up with the socket and press the switch straight down until it seats flat. Fine-tip tweezers from the Vtyzcm kit help position small parts when fingers cannot reach. Press each corner in turn and look at the switch from the side to confirm it sits level with its neighbors.
Step 5: Put the keycaps back and check the board
Press each keycap back onto its switch, plug the board in, and type a few lines to confirm every key answers. If a key stays silent, pull its switch again and reseat it. The cleaning brushes in the Vtyzcm kit and the QORVANILEX set reach around the switch housings while the caps are off.
The gear for a mechanical keyboard repair
Each step above needs a tool that fits it: the keycap step needs a keycap puller, the switch step needs a switch puller with a steady grip, and the seating step needs tweezers for small parts. The tools below cover those steps, ranked by score, highest first.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | GLORIOUS Switch Puller | 9.7/10 | Buy on Amazon |
| 2 | Vtyzcm 8-Piece Kit | 9.7/10 | Buy on Amazon |
| 3 | GATERON Twins 2 in 1 | 9.6/10 | Buy on Amazon |
| 4 | QORVANILEX 2-in-1 Puller | 9.5/10 | Buy on Amazon |

GLORIOUS Switch Puller
A stainless steel switch puller with reinforced arms the maker calls bend-proof, a slim profile, and a 73 Year Limited Manufacturer warranty.
Pros
- 100% stainless steel body, per the listing
- Reinforced arms the maker calls bend-proof
- Slim ergonomic profile with a smooth, matte finish for grip
- 73 Year Limited Manufacturer warranty is stated
Cons
- Switch puller only, with no keycap puller in the same tool
- No keycap puller, tweezers or brushes are included
- No color choice is stated beyond black
Detailed Review
GLORIOUS lists this as a stainless steel premium switch puller for mechanical keyboard switches, with a 100% stainless steel body, a slim ergonomic profile, reinforced arms the maker calls bend-proof, and a smooth, matte finish that helps grip. The spec table gives a 0.02 lb item weight and dimensions of 0.04 in on each side, which read as placeholder figures rather than a measured size. The spec table states a 73 Year Limited Manufacturer warranty.
Who it's for: someone who pulls switches often and wants a steel puller with a long stated warranty. Who should skip it: anyone who also needs a keycap puller, tweezers or brushes in the same purchase.
Its Office Score of 9.7/10 comes from performance 30/35, build 22/25, value 21/25, safety not scored (non-powered gear) and warranty 3/5: 76 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Body | 100% stainless steel |
|---|---|
| Arms | Reinforced, bend-proof |
| Profile | Slim ergonomic |
| Item weight | 0.02 lb |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 73 Year Limited Manufacturer. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Vtyzcm 8-Piece Kit
An 8-piece maintenance kit with dual-style keycap pullers, two switch pullers, precision tweezers and three cleaning brushes for keycap removal, switch extraction and cleaning.
Pros
- 8-piece kit covers keycaps, switches, tweezers and brushes in one purchase
- Two switch pullers and dual-style keycap pullers are included
- Three cleaning brushes are included for debris around the switches
- Tools remove components without soldering or specialized equipment, per the listing
Cons
- 30-day warranty is the briefest stated term here
- No dimensions or weight are stated
- No material grade is stated beyond high-strength metal
- The listing leans on professional-use claims that cannot be checked from specs
Detailed Review
Vtyzcm lists this as an 8-piece keyboard maintenance kit with dual-style keycap pullers, two switch pullers, precision tweezers and three cleaning brushes, built from high-strength metal. The listing states the tools remove components without soldering or specialized equipment, and the kit supports hot-swappable keyboards. The spec table states a 30-day warranty and no dimensions, weight or material grade beyond high-strength metal.
Who it's for: someone who wants every repair tool in one kit, from keycaps to cleaning. Who should skip it: anyone who wants a single steel puller with a long warranty, or stated dimensions.
Its Office Score of 9.7/10 comes from performance 32/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 2/5: 76 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pieces | 8-piece kit |
|---|---|
| Switch pullers | Two |
| Cleaning brushes | Three |
| Tweezers | Precision tweezers |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 30-day warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

GATERON Twins 2 in 1
A 2-in-1 tool with a switch puller and a keycap puller in one green housing, which holds the switch and keycap after pulling so they do not get lost.
Pros
- Switch puller and keycap puller in one tool
- Holds the switch and keycap after pulling, so they do not fall off and get lost
- Press one key to pop the held switch and keycap out, per the listing
- Rectangular design, per the listing, for flexible use
Cons
- No warranty term is stated
- PC material housing, not metal
- No tweezers or cleaning brushes are included
- No dimensions or weight are stated
Detailed Review
GATERON lists the Twins as a 2 in 1 DIY tool with a switch puller and a keycap puller in one green tool, with a PC material housing and a rectangular design. The listing states the tool holds the switch and keycap after pulling, so they do not fall off and get lost, and a press pops the held switch and keycap out. No warranty, dimensions or weight are stated.
Who it's for: someone who wants one tool for both keycaps and switches, and likes the held-parts design. Who should skip it: anyone who wants metal construction, a warranty term, or tweezers and brushes.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Functions | Switch puller and keycap puller |
|---|---|
| Housing | PC material |
| Color | Green |
| Design | Rectangular |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

QORVANILEX 2-in-1 Puller
A 2-in-1 switch and keycap puller with a four-claw metal grip, a spring-loaded quick eject design, an ABS handle and two mini cleaning brushes.
Pros
- Four-claw metal grip spreads pressure around the switch body
- Spring-loaded quick eject design for faster removal, per the listing
- Two mini cleaning brushes are included for narrow areas
- ABS handle with metal claws keeps the tool light in the hand
Cons
- No warranty is stated, the spec table reads No
- ABS body, not metal, on the handle
- No dimensions are stated
- Suitable for many common switch types, not every switch
Detailed Review
QORVANILEX lists this as a 2-in-1 switch puller and keycap puller with a four-claw metal grip, a spring-loaded quick eject design, an ABS handle and two mini cleaning brushes. The listing states the four-claw head spreads pressure more evenly around the switch body than common two-prong designs, and the brushes clean around PCB slots and switch housings. The spec table states no warranty, and no dimensions are stated.
Who it's for: someone who wants a four-claw grip and brushes for cleaning while the caps are off. Who should skip it: anyone who wants a warranty term, stated dimensions, or a steel body.
Its Office Score of 9.5/10 comes from performance 27/35, build 19/25, value 19/25, safety not scored (non-powered gear) and warranty 0/5: 65 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Grip | Four-claw metal |
|---|---|
| Handle | ABS |
| Brushes | 2 mini cleaning brushes |
| Eject | Spring-loaded quick eject |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
FAQ
Do I need to solder to repair a mechanical keyboard?
Not on a hot-swappable board. The Vtyzcm kit states its tools remove components without soldering or specialized equipment, and the QORVANILEX puller is designed for hot-swap mechanical keyboard maintenance. Boards that are not hot-swappable need a different approach.
What is the difference between a keycap puller and a switch puller?
A keycap puller lifts the keycap off the switch, and a switch puller lifts the switch out of the board. The GATERON Twins tool has both in one tool, and the QORVANILEX puller is also a 2-in-1 tool with a cleaning brush.
How many pieces are in the Vtyzcm kit?
8 pieces. The kit includes dual-style keycap pullers, two switch pullers, precision tweezers, and three cleaning brushes.
What warranty does the GLORIOUS Switch Puller carry?
A 73 Year Limited Manufacturer warranty, as the spec table states.
More for your workspace
See the mechanical keyboard parts, the mechanical keyboard types guide and the keyboard switches types guide.









