Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Audio, Power and Connectivity

Types of VGA Cable: Connectors and Uses Explained

A guide to the types of VGA cable, from straight VGA to VGA cables to HDMI and DisplayPort adapters, with connector types and resolutions.

Types of VGA Cable: Connectors and Uses Explained

The spare monitor on the side of the desk has a VGA socket on the back and nothing else, while the laptop beside it offers only modern digital ports. The types of VGA cable that bridge that gap are a straight VGA to VGA cable, an HDMI to VGA adapter cable or adapter, and a DisplayPort to VGA adapter, and the right choice depends on the ports at each end of the connection.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

VGA is an analog video connection, and the familiar blue connector with a 15-pin layout is the HD15 plug found on older monitors, projectors and computers. A straight VGA to VGA cable joins VGA ports at each end, so it suits a computer and a display that carry VGA sockets. Where only the display has VGA, an adapter converts a digital signal to analog: HDMI to VGA adapters and DisplayPort to VGA adapters work in that direction only, and the signal cannot run the other way. Small adapters end in a VGA female socket, so a separate VGA cable runs from the adapter to the display. VGA carries video only, so audio needs a separate route where the setup calls for sound.

Types of VGA cable at a glance

Type Ends Direction Resolution support
VGA to VGA cable HD15 male to HD15 male VGA to VGA Up to 1920×1080
HDMI to VGA adapter cable HDMI male to VGA male HDMI to VGA only Up to 1920×1080 at 60Hz
HDMI to VGA adapter HDMI male to VGA female HDMI to VGA only Up to 1920×1080 at 60Hz
DisplayPort to VGA adapter DisplayPort male to VGA female DisplayPort to VGA only Up to 1920×1080 at 60Hz, and 1920×1200

Resolution figures in the table come from the listings. Straight VGA cables and adapters alike state support up to 1920×1080, with some adapters also listing 1920×1200, and the figure that applies in a given setup depends on the cable or adapter and on the display.

VGA to VGA cables

A straight VGA cable is the simplest member of the family: a HD15 male plug at each end, joined by a cable, with screws that hold each plug in its socket. The PASOW listing describes a 3 ft cable in blue, with a PVC jacket, molded strain relief and grip treads that make the plugs easier to seat and remove, plus finger-tightened screws for a firm connection. The same listing states support for 800×600 (SVGA), 1024×768 (XGA), 1600×1200 (UXGA) and 1920×1080, for high resolution LCD and LED monitors. That range covers the common resolutions of older office monitors and projectors, and the screw-in plugs suit a desk where the cable stays put rather than travelling in a bag. A straight cable only helps where the source and the display carry VGA ports; where the source has moved on to digital-only outputs, an adapter takes over.

HDMI to VGA adapter cables and adapters

HDMI to VGA products convert a digital HDMI signal to an analog VGA signal, and every listing stresses the same limit: the conversion runs from HDMI to VGA only, and cannot carry a signal from VGA to HDMI. The SWITCHFLUX listing is a 10 ft adapter cable with an HDMI male plug at the source end and a VGA male plug at the display end, built around an internal chip, with a nylon braided jacket and an aluminum alloy shell around the plugs. It states support up to 1920×1080 at 60Hz, with backward compatibility for 720p, 1600×1200 and 1280×1024, and it states plainly that the cable carries no audio. The BENFEI listing is a compact adapter instead of a cable: an HDMI male plug on the source side and a VGA female socket on the display side, so a separate VGA cable runs from the adapter to the monitor. It states the same ceiling of 1920×1080 at 60Hz, including 720p, 1600×1200 and 1280×1024, with a gold-plated HDMI connector and molded strain relief. Each listing describes plug and play use with no driver installation and no separate power connection, and each names computers, laptops, Chromebooks, Raspberry Pi units, Roku players and Xbox consoles among the compatible sources. The listings also warn that Blu-ray players and devices with low-power HDMI ports sit outside the compatible list, naming Apple TV and Mac mini among them. The cable suits a fixed desk where the run from source to display is long; the compact adapter suits a bag or a presentation kit, with a VGA cable added at the far end.

DisplayPort to VGA adapters

DisplayPort to VGA adapters serve the same purpose from a DisplayPort source, and the listings describe them as working from DisplayPort to VGA only: the signal travels from a DisplayPort port on a computer to a VGA port on a monitor, projector or TV, and a VGA cable is required between the adapter and the display. The Moread listing states support up to 1920×1080 at 60Hz, described as 1080p Full HD, and up to 1920×1200, with a gold-plated DisplayPort connector, molded strain relief and a locking DisplayPort connector with latches that hold the plug in place; a release button on the connector must be pressed before unplugging. The Cableader listing describes a compact adapter with an oxygen-free copper core, a DisplayPort connector with latches and a release button, and the same reminder that a separate VGA cable is needed. The Moread listing names HP, Lenovo, Dell and ASUS among the compatible computer makers, and describes mirror mode for duplicating the main display and extend mode for widening the desktop across screens. The adapter suits a desk where the computer carries DisplayPort and the monitor keeps its VGA input, and the locking connector suits a shared desk where a loose plug would interrupt a call.

How to choose among the types of VGA cable

Start with the ports: look at the video output on the source and the input on the display, and match the adapter to that pair. Where each end carries VGA, a straight cable is enough. Where the source carries HDMI or DisplayPort and the display carries VGA only, pick the adapter that matches the source port, and check that the adapter runs in the right direction, since these adapters cannot run in reverse. Next, check the resolution the setup needs against the figures the listing states: the listings here state support up to 1920×1080 at 60Hz, with some also listing 1920×1200, so a monitor that needs more than that calls for a different connection. Then measure the run from source to display before ordering: the listings include a 3 ft straight cable and a 10 ft adapter cable, plus compact adapters that rely on a separate VGA cable of whatever length the desk needs. The best HDMI adapters with VGA support guide compares adapter options in more detail, and a USB hub for video can add ports where a laptop is short of outputs. Finally, look at the warranty term the listing states: the listings here state a 5-year term, a 2-year term and an 18-month term, and the remaining listings state no warranty term. Keep the cable run tidy with the best cable management for monitor arms.

FAQ

What is a VGA cable used for?

A VGA cable carries analog video from a computer to a monitor, projector or TV with a VGA input. Straight VGA to VGA cables join VGA ports at each end, while adapter cables and adapters connect a digital HDMI or DisplayPort source to a VGA display.

Can an HDMI to VGA adapter send a signal from VGA to HDMI?

No. The listings state that HDMI to VGA adapters convert from HDMI to VGA only, and cannot transmit a signal from VGA to HDMI. A setup that needs the reverse direction calls for a different converter.

Does a VGA cable carry audio?

No. The SWITCHFLUX listing states that its HDMI to VGA cable has no audio transmission, and VGA is a video-only connection, so sound needs a separate cable or speaker connection where the setup calls for it.

What resolutions can a VGA connection support?

The listings state support up to 1920×1080 at 60Hz, with some also listing 1920×1200, 1600×1200, 1280×1024, 1024×768, 800×600 and 720p. The figure that applies depends on the cable or adapter and on the display.

How long should the VGA cable be?

Measure the run from the source to the display and pick a length that reaches with slack for routing. The listings include a 3 ft straight cable, a 10 ft adapter cable and a compact 25 cm adapter that pairs with a separate VGA cable.

More for your workspace

See the best HDMI adapters with VGA support, the best USB hubs for video, the best DisplayPort splitters for extra monitors and the best cable management for monitor arms.