The video call freezes in the far bedroom, the laptop drops off the network by the kitchen table, and the router sits rooms away behind a wall of books. Wifi extender types sort the options: a plug-in range extender, a mesh-compatible extender, or a box set to access point mode. This guide explains each type, what it does, and how the stated figures tell them apart.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
A range extender picks up the router signal and repeats it into the dead zone. A mesh-compatible extender does the same job while joining the router network under a single network name, so devices move between the router and the extender without changing networks. An extender in access point mode works the other way around: it takes a wired connection and turns it into Wi-Fi.
Wifi extender types
The table lines up the types in this guide with the figures the listings state. Coverage and device counts are the maker figures, and actual results vary by conditions, distance and walls.
| Type | Listing | Coverage as stated | Speed as stated | Devices as stated |
|---|---|---|---|---|
| Plug-in, WiFi 5 | TP-Link RE315 | up to 1500 sq ft | 1.2 Gbps | 32 devices |
| Plug-in, WiFi 5 | TP-Link RE220 | up to 1200 sq ft | 750 Mbps | 20 devices |
| Plug-in, WiFi 5 | TP-Link RE550 | up to 2100 sq ft | 1300 Mbps | 32 devices |
| Plug-in, WiFi 6 | TP-Link RE715X | up to 2400 sq ft | 3 Gbps | 64 devices |
| Plug-in, WiFi 7 | TP-Link RE223BE | up to 2400 sq ft | 3.2 Gbps | 64 devices |
| Plug-in, WiFi 5 | NETGEAR EX5000 | up to 1500 sq ft | 1.2 Gbps | 25 devices |
The VERMEYEN states the widest coverage in the listings at up to 5000 sq ft for up to 35 devices, at 1200 Mbps. A few listings state one figure in the title and a different figure in the bullets: the RE315 title states up to 1600 sq ft while the bullets state up to 1500 sq ft, the RE220 title states 32 devices while the bullets state up to 20 devices, and the RE550 title states up to 2200 sq ft while the bullets state up to 2100 sq ft.
Plug-in extender: the wall-outlet type
The plug-in extender is the common type in the listings: a small box that plugs straight into a wall outlet, with antennas on the outside and an Ethernet port on the side. The TP-Link RE315 (on Amazon) states 867 Mbps on the 5 GHz band and 300 Mbps on the 2.4 GHz band, with coverage up to 1500 sq ft for up to 32 devices. The NETGEAR EX5000 (on Amazon) states the same shape at 1.2 Gbps across two bands, with coverage up to 1500 sq ft for up to 25 devices. The RE550 adds an extra antenna and states 1300 Mbps on the 5 GHz band and 600 Mbps on the 2.4 GHz band, with coverage up to 2100 sq ft for up to 32 devices.
The RE220 shows the lower end: 433 Mbps on the 5 GHz band and 300 Mbps on the 2.4 GHz band, with coverage up to 1200 sq ft and a 100 Mbps Ethernet port. TP-Link lists a 2 year manufacturer warranty on the RE315, the RE220, the RE550, the RE715X, the RE223BE, the RE515X and the RE615X, while NETGEAR lists a 1 year warranty on the EX5000.
Mesh-compatible extender: one network name
An EasyMesh-compatible extender joins an EasyMesh-compatible router under one unified Wi-Fi network, so a phone or laptop keeps the same network name while moving through the home. The RE315, RE550, RE715X, RE223BE, RE515X and RE615X all state EasyMesh compatibility. With a router that does not support EasyMesh, the extender creates a separate network name instead.
These extenders are not mesh nodes, and the listings say so plainly: the RE315, RE550, RE715X and RE615X state that they are not compatible with Deco mesh systems. NETGEAR puts it plainly for the EX5000: it extends the router, it does not replace it.
Access point mode: wired in, Wi-Fi out
Some listings state an access point mode, which turns a wired connection into a Wi-Fi hotspot. The RE220, RE550, RE715X and RE515X each state AP mode through the Gigabit Ethernet port, so a cable run to the dead zone becomes a fresh Wi-Fi signal. The VERMEYEN lists three modes, with repeater and access point among them, and an Ethernet port for the wired side.
An Ethernet port also serves a single wired device, such as a smart TV. The RE315 states one Ethernet port, the RE220 states a 100 Mbps Ethernet port, and the RE550, RE715X, RE223BE, RE515X and RE615X state a Gigabit Ethernet port. The ethernet switch types guide explains what happens when the gear near the extender needs more wired ports than the extender provides.
WiFi 5, WiFi 6 and WiFi 7 extenders
The WiFi generation sets the top speed and the features. WiFi 5 extenders in the listings run from the AC750 RE220 at 750 Mbps through the AC1200 RE315 and EX5000 at 1.2 Gbps to the AC1900 RE550. WiFi 6 extenders step up: the AX1500 RE515X states 1.5 Gbps, the AX1800 RE615X states 1.8 Gbps, and the AX3000 RE715X states 3 Gbps with 2404 Mbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band. The WiFi 7 RE223BE states 3.2 Gbps with 2594 Mbps on the 5 GHz band and 688 Mbps on the 2.4 GHz band, plus MLO, 160 MHz and 4K-QAM.
The generation only pays off with a matching router. The RE223BE states that its WiFi 7 benefits need a WiFi 7 router, and it does not support the 6 GHz band, working on the 2.4 GHz and 5 GHz bands only. A WiFi 6 extender paired with a WiFi 5 router still works, but the WiFi 6 features stay out of reach, so match the extender to the router before buying.
What an extender does not do
An extender does not make the internet faster. TP-Link states it plainly across the listings: extenders improve WiFi coverage and do not increase speeds, and actual speeds will be 50% or less from current speeds. What improves is the reliability of the signal in the dead zone, which can make streaming and calls feel smoother even while the raw speed stays the same.
An extender also does not replace the router, and it does not change a slow internet plan. When the router signal barely reaches the spot where the extender sits, the extender has little to repeat, so placement matters as much as the model.
How to place the extender
Place the extender between the router and the dead zone, close enough to the router for a strong signal and far enough along to reach the rooms that need it. The TP-Link listings point to the intelligent signal indicator on the extender, and the Tether app helps find the spot with the strongest signal. Set the extender up through the app or the WPS button on the router, then walk to the dead zone and check whether the signal holds. The wifi extender setup guide walks through the plug-in, connect and place steps.
Keep the firmware updated through the app, since the listings note that updates keep the WiFi performing at its best. When the dead zone sits behind thick walls or across floors, a wired access point or another extender closer to the router may serve better than a single extender pushed too far from the router.
FAQ
Do WiFi extenders increase internet speed?
No. TP-Link states that extenders improve WiFi coverage and do not increase speeds, with actual speeds at 50% or less from current speeds. The gain is a stronger signal in the dead zone, not a faster plan.
Is a mesh system the same as a WiFi extender?
No. A mesh system uses linked nodes that replace the router setup, while an extender stretches the router already in place. EasyMesh-compatible extenders join an EasyMesh router under one network name, and the listings state they are not compatible with Deco mesh systems.
What is access point mode on a WiFi extender?
Access point mode turns a wired connection into a Wi-Fi hotspot. The RE220, RE550, RE715X and RE515X state AP mode through the Gigabit Ethernet port, so a cable run to the dead zone becomes a fresh Wi-Fi signal.
Where should a WiFi extender go?
Between the router and the dead zone, close enough to the router for a strong signal. Use the signal indicator on the extender or the Tether app to find the spot, and keep the firmware updated through the app.
Should the extender be WiFi 6 or WiFi 7?
Match the extender to the router. WiFi 7 benefits need a WiFi 7 router, as the RE223BE states, and the RE223BE does not support the 6 GHz band. A WiFi 6 extender still works with an older router, but its WiFi 6 features stay out of reach.
More for your workspace
See the wifi extender setup guide, the ethernet switch types, the best ethernet cables for a home office and the best cable management boxes for a wifi router.
More picks: audio, power and connectivity, outlet timers for wifi routers, surge protectors for routers and ethernet cables for a home office.





