Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Audio, Power and Connectivity

What WiFi Extender Do I Need for the Home Office

Match the coverage to the rooms the router cannot reach, then pick the speed and device count for the home, and place the extender halfway to the dead zone.

What WiFi Extender Do I Need for the Home Office

The video call freezes in the spare room, the laptop drops off the network at the kitchen table, and the router signal fades before it reaches the far bedroom. That is the moment that makes a home worker ask what wifi extender do i need, and the short answer is to match the coverage to the rooms the router cannot reach, then pick the speed and device count for the home, and place the extender halfway to the dead zone.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

Size an extender by coverage first, then by speed and device count. The listings here cover from 1200 sq ft to 5000 sq ft, so a small flat fits the smaller end and a larger home with rooms across floors fits the larger end. Speeds here run from 750 Mbps to 3.2 Gbps, and device counts run from 20 to 64 devices, so match the speed to the router and the device count to the phones, laptops and smart-home gear on the network. An extender improves coverage and does not increase speeds: the listings state actual speeds will be 50% or less from current speeds, so a stronger signal in a dead zone is the gain, not a faster plan.

What wifi extender do I need for the home office

The table below lists the WiFi extenders in the reference listings, with the 5 GHz speed, coverage and device count each maker states.

Extender 5 GHz speed Coverage Devices
TP-Link RE220 (AC750) 433 Mbps Up to 1200 sq ft Up to 20 devices
TP-Link RE315 (AC1200) 867 Mbps Up to 1500 sq ft Up to 32 devices
NETGEAR EX5000 (AC1200) Not stated Up to 1,500 sq ft Up to 25 devices
VERMEYEN 1200Mbps 867 Mbps Up to 5000 sq ft Up to 35 devices
TP-Link RE515X (AX1500) 1201 Mbps Up to 1800 sq ft Up to 64 devices
TP-Link RE615X (AX1800) 1201 Mbps Up to 2100 sq ft Up to 64 devices
TP-Link RE550 (AC1900) 1300 Mbps Up to 2100 sq ft Up to 32 devices
TP-Link RE715X (AX3000) 2404 Mbps Up to 2400 sq ft Up to 64 devices
TP-Link RE223BE (BE3200) 2594 Mbps Up to 2400 sq ft Up to 64 devices

Coverage figures assume open space and vary by conditions, distance to devices, and obstacles such as walls, as the listings state. The VERMEYEN unit lists the widest coverage at up to 5000 sq ft, while the TP-Link RE220 (on Amazon) lists the smallest at up to 1200 sq ft, so the size question starts with the rooms the router cannot reach.

Step 1: Find the dead zones

Walk the home with a phone and note where the signal drops: the far bedroom, the garage, the basement and the backyard are the rooms the listings name. The router covers the rooms near it, and the extender covers the rooms past the dead zone, so the dead zone map sets the coverage figure. A single dead room fits the smaller end of the table, while dead zones across floors and the garden fit the larger end.

Step 2: Match the speed to the router

An extender cannot make the connection faster than the router and the plan behind it, so match the extender speed to the router speed. The listings here run from 750 Mbps to 3.2 Gbps: the RE220 gives 750 Mbps, with 433 Mbps on the 5 GHz band and 300 Mbps on the 2.4 GHz band, while the RE223BE gives 3.2 Gbps, with 2594 Mbps on the 5 GHz band and 688 Mbps on the 2.4 GHz band. WiFi 5 units here top out at 1300 Mbps on the 5 GHz band, WiFi 6 units reach 2404 Mbps on the 5 GHz band, and the WiFi 7 unit reaches 2594 Mbps on the 5 GHz band, so the generation sets the ceiling. Actual speeds will be 50% or less from current speeds, as the listings state, so size by coverage and let the speed figure follow the router.

Step 3: Count the devices

Count the phones, laptops and smart TVs that will use the extended network, then match the count to a unit. The listings here cover from 20 devices to 64 devices: the RE220 covers up to 20 devices, the EX5000 covers up to 25 devices, the RE315 and RE550 cover up to 32 devices, the VERMEYEN unit covers up to 35 devices, and the WiFi 6 and WiFi 7 units cover up to 64 devices. When the count sits near a limit, move up to the next size rather than running a unit at its limit.

Step 4: Place it halfway and set it up

Place the extender halfway between the router and the dead zone, where it still gets a strong signal from the router. The TP-Link units have an intelligent signal indicator that shows the best spot, and setup runs through the Tether app or the WPS button on the router and extender. The RE315, RE550, RE715X, RE515X, RE615X and RE223BE work with an EasyMesh-compatible router for one unified network, and with a non-EasyMesh router the extender creates a separate network name. The VERMEYEN listing adds two setup tips: turn off mobile data on the phone before setup, and hold the reset button for 10 seconds to restore factory settings if the password fails. The RE220, RE550, RE715X and RE515X also offer access point mode, which turns a wired connection into a Wi-Fi hotspot through the Ethernet port. See the wifi extender how to set up guide for the plug-in steps.

Dual band, antennas and the Ethernet port, in plain words

Every unit here works on two bands: 2.4 GHz for range and 5 GHz for speed, with the 5 GHz band giving the higher figure wherever the listing splits the bands. The RE223BE works on the 2.4 GHz and 5 GHz bands only and does not support the 6 GHz band. Antennas differ: the RE315 has two adjustable external antennas, the RE550 has three adjustable external antennas, the RE715X and RE515X have two high-gain directional antennas with Beamforming, and the RE223BE has four antennas with Beamforming. A gigabit Ethernet port gives a wired connection for a device that needs one: the RE550, RE715X, RE515X and RE615X list one, the RE315 lists one Ethernet port, and the RE220 lists a 100 Mbps Ethernet port. The NETGEAR unit lists WPA2 and WPA3, and it works with any router. For the kinds of extenders, see the WiFi extender types guide.

FAQ

Do I need a WiFi extender or a new router?

An extender fits when the router works well near it and only the far rooms lose signal. The extender improves coverage and does not increase speeds, so a slow plan or a failing router calls for a router change, not an extender. When the router is fine and the dead zones are the problem, an extender covers the gap.

How much coverage do I need?

Match the figure to the rooms the router cannot reach. The listings here run from 1200 sq ft to 5000 sq ft: the RE220 covers up to 1200 sq ft, the RE315 covers up to 1500 sq ft, the EX5000 covers up to 1,500 sq ft, and the VERMEYEN unit covers up to 5000 sq ft. Coverage varies by conditions, distance to devices, and obstacles such as walls, so place the extender where the router signal is still strong.

Will a WiFi extender make my internet faster?

No. Every listing here states that extenders improve coverage and do not increase speeds, and that actual speeds will be 50% or less from current speeds. The gain is a stronger signal in rooms where the signal was weak, not a faster plan.

What is EasyMesh?

EasyMesh lets an extender and a compatible router form one unified network with seamless roaming, so devices move between them without a separate network name. The RE315, RE550, RE715X, RE515X, RE615X and RE223BE work with an EasyMesh-compatible router, and with a non-EasyMesh router the extender creates a separate network name. The RE220 supports OneMesh instead, and the EasyMesh units here state they are not compatible with Deco mesh systems.

Can I plug a device into the extender with a cable?

Yes, when the extender has an Ethernet port. The RE550, RE715X, RE515X and RE615X list a gigabit Ethernet port, the RE315 lists one Ethernet port, and the RE220 lists a 100 Mbps Ethernet port, so a smart TV or a laptop can use a wired connection through the extender.

More for your workspace

See every Audio, Power and Connectivity guide, the best mesh WiFi for home systems and the WiFi extender types guide.