The best power strip zip tie mount is the small base that keeps a power strip and its cords from sliding across the floor every time a cable gets tugged, stuck or screwed or held by a magnet to the underside of a desk or the side of a filing cabinet. A tidy desk can still hide a mess underneath, with a charger cord dropping behind the desk and a strip that creeps out of reach. We compared zip tie mounts by pack size, mount size, tie length, adhesive type and stated hold.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Rythcraft 140 Pack Mounts: 140 mounts, 140 ties and 40 clips, UL nylon, 94V-2 grade Check price on Amazon
Best 4-Way Routing SeuYeugX 1 in Mounts: 1 in base, 4-way routing, 8 in ties, 100 sets Check price on Amazon
Best 100-Set Kit CZXNBI 100 Set Mounts: 100 mounts, 100 6 in ties, 3M adhesive, screw hole Check price on Amazon
Best Black-and-White Pack BesSTICK 50 Mounts: 25 black, 25 white mounts, holds up to 1 lb Check price on Amazon
Best Magnetic Mount CNHABAGU Magnetic Mount: 25 lbs pull force on metal, no tools or adhesive Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Rythcraft 140 Pack Mounts | 9.7/10 | Buy on Amazon |
| 2 | SeuYeugX 1 in Mounts | 9.5/10 | Buy on Amazon |
| 3 | CZXNBI 100 Set Mounts | 9.5/10 | Buy on Amazon |
| 4 | BesSTICK 50 Mounts | 9.4/10 | Buy on Amazon |
| 5 | CNHABAGU Magnetic Mount | 9.4/10 | Buy on Amazon |

Rythcraft 140 Pack Mounts
A 140-pack kit of adhesive mounts, cable ties and clips with UL-certified nylon ties and a 94V-2 grade mount.
Pros
- 140 mounts, 140 cable ties and 40 clips in one pack
- UL-certified nylon ties; mount stated as 94V-2 grade
- Listing states a -40 F to 185 F range for the ties
- 3M adhesive, no tools or drilling needed
Cons
- No tie length is stated
- No warranty term is stated
- No hold weight is stated
- No screw hole is stated for the mounts
Detailed Review
Rythcraft lists a 140-pack kit: 140 cable ties, 140 adhesive mounts and 40 cable clips, with a 0.75 x 0.75 x 0.16 in mount size. The ties use UL-certified nylon, the mount is stated as 94V-2 grade PC, and the listing states a -40 F to 185 F range with 3M adhesive. The ties resist alkali, oil and UV, and the mounts install with no tools and no drilling. No tie length, hold weight or warranty term is stated.
Who it's for: someone stocking a whole desk setup or a workshop who wants the largest kit here with UL nylon and a 94V-2 grade mount. Who should skip it: anyone who needs a stated tie length or hold weight, or who only needs a handful of mounts.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 22/25, safety 9/10 and warranty 0/5: 85 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 140 mounts, 140 ties, 40 clips |
|---|---|
| Mount size | 0.75 x 0.75 x 0.16 in |
| Tie material | UL-certified nylon |
| Mount grade | 94V-2 |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. UL-certified nylon ties and a 94V-2 grade mount are stated, so safety scores 9 of 10. No warranty term, so warranty scores zero. See How We Pick.
Surge protector limits. Look for a UL 1449 listing, never plug one strip into another, keep the total load under the stated rating, and replace the unit after a major surge or when its indicator says protection has ended.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

SeuYeugX 1 in Mounts
A 100-set kit of 1 in adhesive mounts with 8 in ties, 4-way routing and screw holes.
Pros
- 100 mounts and 100 8 in ties in one kit
- 4-way routing feeds a tie from any of four directions
- 23 x 23 x 7 mm base with an 8 x 3 mm slot for the 2.6 mm ties
- Two 3 mm holes allow screw mounting
Cons
- No warranty term is stated
- No hold weight is stated
- Screws are not included
- Adhesive needs a clean, dry, smooth surface and time to set
Detailed Review
SeuYeugX lists a 100-set kit: 100 black adhesive mounts and 100 black 8 in x 2.6 mm zip ties. Each mount measures 23 x 23 x 7 mm with an 8 x 3 mm slot, and 4-way routing lets a tie feed from any of four directions. Two 3 mm holes allow screw mounting, though screws are not included, and the listing suits the kit to server racks, data centers, network closets, telecom cabinets and offices. No hold weight or warranty term is stated.
Who it's for: someone routing Ethernet, USB, AV, control and power cables in separate runs who wants the largest base here. Who should skip it: anyone who needs a stated hold weight or warranty term, or who wants screws included.
Its Office Score of 9.5/10 comes from performance 32/35, build 22/25, value 21/25, safety 0/10 and warranty 0/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 100 mounts, 100 ties |
|---|---|
| Mount size | 23 x 23 x 7 mm |
| Tie length | 8 in |
| Routing | 4-way |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Surge protector limits. Look for a UL 1449 listing, never plug one strip into another, keep the total load under the stated rating, and replace the unit after a major surge or when its indicator says protection has ended.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

CZXNBI 100 Set Mounts
A 100-set kit of 3/4 in adhesive mounts with 6 in zip ties, 3M adhesive and a built-in screw hole.
Pros
- 100 mounts and 100 6 in ties in one kit
- 3M adhesive and PA66 nylon are stated
- Built-in screw hole allows added strength
- Listing states a 90-day money-back window
Cons
- No warranty term is stated
- Mounts are 3/4 in, smaller than the 1 in SeuYeugX base
- Ties are 6 in, shorter than the 8 in ties in the SeuYeugX kit
- No hold weight is stated
Detailed Review
CZXNBI lists a 100-set kit with 100 black adhesive mounts at 3/4 in x 3/4 in and 100 black nylon zip ties at 6 in x 0.14 in. The mounts use 3M adhesive and PA66 nylon, install with no tools, and include a screw hole. The listing says to press each mount about 10 seconds on a clean, flat and dry surface, and states a 90-day money-back window. No hold weight or warranty term is stated.
Who it's for: someone who wants a full 100-set kit with 3M adhesive and a screw hole for guiding cords under a desk. Who should skip it: anyone who needs 8 in ties, a larger mount base or a stated hold weight.
Its Office Score of 9.5/10 comes from performance 30/35, build 21/25, value 21/25, safety 0/10 and warranty 0/5: 72 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 100 mounts, 100 ties |
|---|---|
| Mount size | 3/4 x 3/4 in |
| Tie size | 6 in x 0.14 in |
| Adhesive | 3M |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Surge protector limits. Look for a UL 1449 listing, never plug one strip into another, keep the total load under the stated rating, and replace the unit after a major surge or when its indicator says protection has ended.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

BesSTICK 50 Mounts
A 50-mount pack in black and white with matching nylon zip ties and a stated hold of up to 1 lb.
Pros
- 50 mounts in black and white with matching nylon zip ties
- Stated hold of up to 1 lb per mount
- Twist and strip design leaves no residue when removed
- Works on walls, wood, metal, glass and plastic
Cons
- No warranty term is stated
- Indoor use only; not recommended for outdoor, humid or dirty surfaces
- Smallest stated hold here at 1 lb
- No screw hole is stated
Detailed Review
BesSTICK lists 50 cable tie mounts with matching nylon zip ties: 25 black and 25 white. Each mount measures 30 mm by 37 mm, uses ABS plastic with an enlarged adhesive surface, and holds up to 1 lb. The twist and strip design removes without a scraper or removal agent and leaves no residue, and the listing suits the mounts to home office cable management, TV wire concealment and computer cable organization. The mounts are for indoor use only, not recommended for outdoor, humid or dirty surfaces. No warranty term is stated.
Who it's for: someone who wants black and white mounts to match light and dark surfaces and a stated 1 lb hold. Who should skip it: anyone mounting outdoors or on a humid or dirty surface, or who needs a warranty term.
Its Office Score of 9.4/10 comes from performance 28/35, build 20/25, value 20/25, safety 0/10 and warranty 0/5: 68 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 50 mounts, 50 ties |
|---|---|
| Mount size | 30 mm by 37 mm |
| Stated hold | 1 lb |
| Material | ABS plastic |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Surge protector limits. Look for a UL 1449 listing, never plug one strip into another, keep the total load under the stated rating, and replace the unit after a major surge or when its indicator says protection has ended.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

CNHABAGU Magnetic Mount
A 6-piece magnetic zip tie mount with a stated 25 lbs pull force, attaching to metal surfaces without tools or adhesive.
Pros
- 25 lbs stated pull force, the highest stated hold here
- Magnetic mount needs no tools or adhesive
- Rubber surface helps it sit on smooth objects
- Listing states waterproof, dust-proof and rustproof construction
Cons
- Only 6 mounts in the pack, the smallest pack here
- Works only on metal surfaces
- No warranty term is stated
- No mount size is stated
Detailed Review
CNHABAGU lists a magnetic zip tie mount in a 6-piece pack with a stated 25 lbs of pulling force. The mount is made of magnets, steel and rubber, attaches to metal surfaces such as desks and filing cabinets with no tools or adhesives, and is waterproof, dust-proof and rustproof. No mount size or warranty term is stated.
Who it's for: someone mounting a power strip or cables on a metal desk leg, filing cabinet or shelf who wants a strong magnetic hold with no adhesive. Who should skip it: anyone mounting on wood, glass or plastic, or who needs more than 6 mounts.
Its Office Score of 9.4/10 comes from performance 28/35, build 20/25, value 19/25, safety 0/10 and warranty 0/5: 67 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 6 mounts |
|---|---|
| Stated hold | 25 lbs |
| Mount type | Magnetic |
| Material | Magnets, steel, rubber |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Surge protector limits. Look for a UL 1449 listing, never plug one strip into another, keep the total load under the stated rating, and replace the unit after a major surge or when its indicator says protection has ended.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
Specs compared
| Mount | Office Score | Pack size | Mount size | Tie length | Adhesive | Stated hold | Amazon |
|---|---|---|---|---|---|---|---|
| Rythcraft 140 Pack Mounts | 9.7/10 | 140 mounts, 140 ties, 40 clips | 0.75 x 0.75 x 0.16 in | Not stated | 3M adhesive | Not stated | View on Amazon |
| SeuYeugX 1 in Mounts | 9.5/10 | 100 mounts, 100 ties | 23 x 23 x 7 mm | 8 in | Self-adhesive | Not stated | View on Amazon |
| CZXNBI 100 Set Mounts | 9.5/10 | 100 mounts, 100 ties | 3/4 x 3/4 in | 6 in | 3M adhesive | Not stated | View on Amazon |
| BesSTICK 50 Mounts | 9.4/10 | 50 mounts, 50 ties | 30 mm by 37 mm | Not stated | Industrial-strength adhesive | 1 lb | View on Amazon |
| CNHABAGU Magnetic Mount | 9.4/10 | 6 mounts | Not stated | Not stated | Magnetic | 25 lbs | View on Amazon |
Specs reflect manufacturer claims on each product listing (as of 12 November 2026). None of the five states a warranty term; one states UL-certified nylon and a 94V-2 grade mount.
How to choose the best power strip zip tie mount
Start with pack size and mount size
Pack sizes here run from 6 mounts in the CNHABAGU pack to 140 in the Rythcraft kit, with 100-set kits from CZXNBI and SeuYeugX and a 50-mount pack from BesSTICK in between. Mount sizes run from 3/4 in on the CZXNBI and Rythcraft mounts to 1 in on the SeuYeugX, while BesSTICK is 30 mm by 37 mm. Match the pack to the cables under the desk: a strip with a few cords needs fewer mounts than a full setup with a monitor, a dock and a charger. A larger base spreads the adhesive over more surface, suiting a heavy strip with a thick cord.
| Mount | Pack size | Mount size | Tie length |
|---|---|---|---|
| Rythcraft 140 Pack Mounts | 140 mounts, 140 ties, 40 clips | 0.75 x 0.75 x 0.16 in | Not stated |
| SeuYeugX 1 in Mounts | 100 mounts, 100 ties | 23 x 23 x 7 mm | 8 in |
| CZXNBI 100 Set Mounts | 100 mounts, 100 ties | 3/4 x 3/4 in | 6 in |
| BesSTICK 50 Mounts | 50 mounts, 50 ties | 30 mm by 37 mm | Not stated |
| CNHABAGU Magnetic Mount | 6 mounts | Not stated | Not stated |
Figures as stated in each listing.
Pick adhesive, screw or magnet
Most mounts here stick on with adhesive: the CZXNBI and Rythcraft use 3M adhesive, and the SeuYeugX uses a self-adhesive backing with two 3 mm screw holes. The CZXNBI also has a built-in screw hole, and the BesSTICK uses industrial-strength adhesive backing. The CNHABAGU holds by magnet, so it suits metal surfaces such as a desk leg or a filing cabinet and needs no tools or adhesive. If the strip itself still needs a home, our best under desk power strip guide compares strips made to live under a desk.
Match tie length to the bundle
Tie length decides how thick a bundle a mount can hold. The SeuYeugX kit includes 8 in ties, the CZXNBI kit 6 in ties, and the Rythcraft kit adjustable ties with no length stated. A longer tie wraps a thicker bundle, so count the cords sharing one mount before choosing a kit. The BesSTICK kit states a 1 lb hold per mount, and the CNHABAGU states 25 lbs of pull force, so a heavier strip suits the magnetic mount where the surface is metal. A power strip holder suits a strip that needs more than ties alone, and a cable management box with power strip hides the whole strip when ties alone leave it visible.
Check the surface before you stick anything down
Adhesive mounts need a clean, flat and dry surface, and the CZXNBI listing says to press each mount about 10 seconds. The SeuYeugX listing warns against dusty, oily, rough or uneven surfaces and says to let the adhesive set before tension. The BesSTICK mounts are for indoor use only, not recommended for outdoor, humid or dirty surfaces. Measure the space under the desk or on the cabinet first, then pick a mount whose base fits the flat area.
Setup Notes
- Measure the flat area under the desk or on the cabinet and match it to the mount size: 3/4 in, 1 in or 30 mm by 37 mm.
- Plan the cable runs before sticking mounts down: the SeuYeugX routes ties in 4 directions, so runs stay separate.
- Press adhesive mounts for about 10 seconds on a clean, dry surface, as the CZXNBI listing states, and let the adhesive set before tension.
- Check the surface: magnets need metal, adhesive needs a smooth surface, and the BesSTICK mounts are for indoor use only.
FAQ
What size zip tie mount do I need for a power strip?
Match the mount to the strip and the surface: the SeuYeugX base measures 23 x 23 x 7 mm, the CZXNBI and Rythcraft mounts 3/4 in, and the BesSTICK 30 mm by 37 mm. A larger base suits a heavier strip, and the CNHABAGU magnetic mount suits metal with a stated 25 lbs of pull force.
How many zip tie mounts do I need under a desk?
It depends on the cables under the desk. Packs here run from 6 to 140 mounts, with 100-set kits in between, so a small setup suits the BesSTICK 50-mount pack and a full setup suits a 100-set kit.
Do adhesive zip tie mounts hold a power strip?
The listings state adhesive, screw and magnetic holds, not a strip weight limit. The BesSTICK states a hold of up to 1 lb per mount, and the CNHABAGU states 25 lbs of pull force, so spread the strip across more than one mount where it is heavy.
Can I use zip tie mounts outdoors?
The CZXNBI and Rythcraft listings state indoor and outdoor use, while the BesSTICK mounts are for indoor use only, not recommended for outdoor, humid or dirty surfaces. The CNHABAGU states a waterproof, dust-proof and rustproof build for indoor and outdoor use.
What is the difference between a 6 in tie and an 8 in tie?
The CZXNBI kit includes 6 in ties and the SeuYeugX kit includes 8 in ties. A longer tie wraps a thicker bundle, so the 8 in ties suit a bundle with more cords while the 6 in ties suit a slimmer run under a desk.
Score breakdown
The Office Score weighs performance, build, value, safety and warranty. For a zip tie mount, safety means a stated certification or grade; the Rythcraft states UL-certified nylon and a 94V-2 grade mount, and the rest state none. None of the five states a warranty term. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Rythcraft 140 Pack Mounts | 9.7 | 32 | 22 | 22 | 9 | 0 |
| SeuYeugX 1 in Mounts | 9.5 | 32 | 22 | 21 | 0 | 0 |
| CZXNBI 100 Set Mounts | 9.5 | 30 | 21 | 21 | 0 | 0 |
| BesSTICK 50 Mounts | 9.4 | 28 | 20 | 20 | 0 | 0 |
| CNHABAGU Magnetic Mount | 9.4 | 28 | 20 | 19 | 0 | 0 |
The scale opens at 9.2 and closes at 9.8; between those marks, weighted points translate linearly into the score you see.
More for your workspace
See our best extra long power strip guide, our best metal power strip guide, our best power strip with usb guide and our best small power strip guide.
More picks: power strip with clamp, power strip for corner desk, power strip for dual monitors, vertical power strip.





