A morning video call starts with a dim webcam and a screen that sits too low, and that is where an ergonomic monitor set up begins. An ergonomic monitor set up puts the screen at eye level, at a comfortable distance, with tilt and swivel that match how you sit. The steps below use figures from monitor arm listings to show how to check the fit, set the height and set the angles.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Set the chair first, then set the screen so the top of the screen sits at or slightly below eye level and about an arm’s length away. Bend your elbows to about 90 degrees and let your forearms rest level while you type, then raise or lower the monitor arm until the middle of the screen sits slightly below eye level. A monitor arm with tilt, swivel and rotation lets you set the angle after the height is right. Check the arm against the screen size, weight and VESA pattern before you buy.
Monitor arm fit chart
Match the arm to the screen and the desk before you buy. The listings below state the screen size range, the weight capacity, the VESA pattern and the desk thickness each arm accepts. Dual monitor arms take two screens: the ErGear dual stand fits 17 to 33 in screens at 4.4 to 22 lbs each arm, and the EUREKA dual stand fits 13 to 32 in screens at 17.6 lbs each arm.
| Arm | Screen size | Weight capacity | VESA | Desk thickness |
|---|---|---|---|---|
| ErGear single arm | 13 to 34 in | 4.84 to 19.8 lbs | 75×75, 100×100 | 0.39 to 2.56 in clamp, 0.39 to 2.95 in grommet |
| HUANUO single arm | 13 to 32 in | 4.4 to 19.8 lbs | 75×75, 100×100 | C-clamp and grommet |
| BenQ BSL01 | Up to 40 in | 24 lbs | 75×75, 100×100 | 10 to 50 mm |
| ErGear ultrawide arm | 13 to 49 in | 37.4 lbs | 75×75, 100×100 | 0.39 to 3.15 in clamp, 0.39 to 2 in grommet |
| BenQ BSH02 | Up to 45 in | 44 lbs | 75×75, 100×100 | 12 to 45 mm |
| ASUS AAS01R | Up to 49 in | 3 to 13.5 kg flat, 3 to 10.5 kg curved | 100×100 | 10 to 80 mm clamp, 0 to 45 mm grommet |
ErGear states to verify the screen size, weight and VESA pattern of the monitor before purchase.
Step 1: Set the chair first
Monitor height only works once the chair is right. Raise or lower the seat until your feet rest flat on the floor and your knees sit at or slightly below hip height. If the desk is fixed and too high, raise the chair to reach the right elbow height and add a footrest so your feet stay supported.
Step 2: Measure your elbow height
Sit back in the chair with your shoulders relaxed and your elbows at your sides bent to about 90 degrees. Have someone measure from the floor to the underside of your forearm. That is the height your keyboard and mouse should sit at. Most desktops are about 1 in thick, so the top of the desk should be at or a little below that figure.
Step 3: Fit the arm to the screen and desk
Check the screen size, weight and VESA pattern against the arm listing. ErGear fits 13 to 34 in screens at 4.84 to 19.8 lbs with VESA 75×75 or 100×100, HUANUO fits 13 to 32 in screens at 4.4 to 19.8 lbs with the same VESA patterns, and BenQ BSH02 fits screens up to 45 in at 44 lbs. For ultrawide screens, the ErGear ultrawide arm fits 13 to 49 in screens at 37.4 lbs, and the ASUS arm (on Amazon) fits screens up to 49 in at 3 to 13.5 kg for flat screens and 3 to 10.5 kg for curved screens. Then check the desk: ErGear takes a C-clamp for desks 0.39 to 2.56 in thick or a grommet base for desks 0.39 to 2.95 in thick, BenQ BSL01 fits desk thickness 10 to 50 mm. HUANUO states setup can be completed in 3 minutes, and EUREKA states less than 15 minutes from opening the box to installing the monitor. Warranty terms stated in the listings run from 1 Year to 10-year. A monitor arm or monitor stand moves the screen without changing the desk.
Step 4: Set the monitor height, tilt and swivel
The top of the screen should sit at or slightly below eye level and about an arm’s length away, so you look slightly down at the middle of the screen. Raise the arm to reach that height: ErGear lifts up to 17.5 in with reach up to 18.1 in, HUANUO lifts the screen up to 39.6 cm, the ErGear ultrawide arm raises the screen up to 22.2 in, 5Rcom lifts up to 17.7 in with reach up to 21.2 in, and EUREKA reaches a max height of 22.64 in. Set the tilt so the screen faces you straight on: ErGear tilts +80 to -50 degrees, HUANUO tilts -50 to +85 degrees, and the ErGear ultrawide arm tilts +30 to -40 degrees. Swivel runs ±90 degrees and rotation runs 360 degrees on the arms listed here, so the screen turns to face you from any seat at the desk.
Ergonomic monitor set up for sitting and standing
When you shop for a monitor arm, check the listed height range against both your sitting and standing positions. EUREKA lists a max height of 22.64 in for sit to stand use, the ErGear ultrawide arm raises the screen up to 22.2 in, and the ASUS arm lists a lift of 32 cm with a max height of 49.98 cm and a max extension of 63.80 cm. If the arm cannot reach your standing height, raise the desk instead and keep the screen at the same height relative to your eyes. A height-adjustable standing desk lets each person set the right height and switch between sitting and standing.
FAQ
What size monitor fits a monitor arm?
Check the arm listing against the screen size: ErGear fits 13 to 34 in screens, HUANUO fits 13 to 32 in screens, BenQ BSL01 fits screens up to 40 in, BenQ BSH02 fits screens up to 45 in, and the ErGear ultrawide arm fits 13 to 49 in screens.
How much weight can a monitor arm hold?
ErGear holds 4.84 to 19.8 lbs, HUANUO holds 4.4 to 19.8 lbs, BenQ BSL01 (on Amazon) holds 24 lbs, the ErGear ultrawide arm holds 37.4 lbs, BenQ BSH02 (on Amazon) holds 44 lbs, and the ASUS arm holds 3 to 13.5 kg for flat screens and 3 to 10.5 kg for curved screens.
What do VESA 75×75 and 100×100 mean?
They are the mounting hole patterns the listings state: most arms here fit VESA 75×75 or 100×100, while the ASUS arm fits VESA 100×100 only. ErGear states to verify the screen size, weight and VESA pattern of the monitor before purchase.
How thick can the desk be for a monitor arm?
ErGear takes a C-clamp for desks 0.39 to 2.56 in thick or a grommet base for desks 0.39 to 2.95 in thick. BenQ BSL01 fits desk thickness 10 to 50 mm, and BenQ BSH02 fits desks 12 to 45 mm thick.
How high can a monitor arm lift the screen?
ErGear lifts up to 17.5 in, HUANUO lifts the screen up to 39.6 cm, the ErGear ultrawide arm raises the screen up to 22.2 in, and EUREKA lists a max height of 22.64 in. The ASUS arm lists a lift of 32 cm with a max height of 49.98 cm.
More for your workspace
See the best standing desks for working from home, the best office chairs for working from home, the best keyboard trays and the best under-desk footrests.





