An ergonomic laptop set up starts with a screen that sits too low: the laptop lies flat on the desk, the screen pulls the gaze down, and the keyboard sits where the hands fall, not where they rest. Raising the screen to eye level and moving the keyboard to a separate board changes the shape of the whole desk. The steps below show how to lift the screen, place the keyboard, and keep the laptop cool.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Raise the screen until the top sits near eye level, then put the keyboard and mouse where the forearms rest level. A stand does the lifting: the OMOTON LA10 (on Amazon) raises the screen from 1.8 to 10.4 inches, the OMOTON LA19 from 0.79 to 4.72 inches, and the Beimu riser (on Amazon) holds the laptop 4 inches up on a fixed acrylic base. With the screen up, a separate keyboard takes over typing, since the laptop keyboard sits too high once the screen is at eye level. Set the tilt so the screen faces you squarely, and leave the vents open so air flows under the laptop.
Ergonomic laptop set up: raise the screen
The screen is the part that sets the height of the whole set up. A laptop on the desk puts the screen well below eye level, so the head tilts down all day; a stand lifts the screen until the top sits near eye level and the gaze lands on the middle of the screen. The stands below lift by different amounts, so match the lift to the desk and the chair: a low desk needs more lift than a high desk, and a stand that folds flat suits a bag while a fixed riser suits a desk that never moves.
| Stand | Fits laptops | Screen lift | Folded size |
|---|---|---|---|
| OMOTON LA10 | 11 to 17 in | 1.8 to 10.4 in | 11.4 x 1.7 in |
| OMOTON LA19 | 10 to 15.6 in | 0.79 to 4.72 in | 0.7 in thick |
| Beimu Acrylic Riser | All laptop sizes; screens up to 38 in | 4 in, fixed | Does not fold |
Check the fit before you order. The LA10 fits laptops from 11 to 17 inches and the LA19 fits laptops from 10 to 15.6 inches, so measure the laptop across the screen, as the laptop stand size guide explains. The Beimu riser states it holds up to 60 lbs and fits monitor screens up to 38 inches, which covers a laptop and a monitor on the same base. Weight matters on a folding stand too: the LA10 weighs 840 g (1.85 lb) and folds to 11.4 x 1.7 inches, while the LA19 folds to 0.7 inch thick and supports up to 4 kg (8.8 lbs).
Step 1: Raise the screen to eye level
Set the stand on the desk and raise it until the top of the screen sits near eye level. The LA10 lifts the screen from 1.8 to 10.4 inches, so it covers a wide range of desk and chair heights; the LA19 lifts from 0.79 to 4.72 inches, which suits a desk that is already close to the right height. The Beimu riser holds the laptop 4 inches up on a fixed base, with no adjustment to set. Sit back, look at the middle of the screen, and adjust the tilt until the screen faces you squarely: the LA10 turns a full 360° for sharing the screen, and the OMOTON stands adjust with a firm push or pull and no tools.
Step 2: Add a separate keyboard and mouse
Once the screen is up, the laptop keyboard sits too high to type on, so a separate keyboard and mouse take over. OMOTON lists the same advice for its LA19 stand, recommending an external keyboard during intense typing. Put the keyboard where the forearms rest level and the mouse beside it, with room to move the mouse freely. A keyboard tray drops the keys below the desktop when the desk is fixed and too high.
Step 3: Set the tilt and distance
Tilt the screen until it faces you squarely, then set the distance. The LA10 lets you set the height and tilt with a firm push or pull, and friction-tight aluminum joints hold the angle you choose. Pull the laptop closer or push it back until the screen fills the view without leaning in: the LA10 rotates 360° on its X-base, so turning the screen toward a colleague takes no extra desk space. Anti-slip silicone pads on the LA10 and the LA19 grip the laptop and protect its finish from scratches, so the laptop stays put while you type on the separate keyboard.
Step 4: Keep air flowing and cables tidy
A laptop on a flat desk blocks its own bottom vents; a stand with an open frame lets air flow freely around the laptop instead. The LA10 has an open X-frame that lets air flow around the laptop, and the sturdy aluminum body conducts heat away; the LA19 has a ventilated platform that lets air circulate underneath the device. Keep the vents clear of papers and sleeves, and run the charger and mouse cables behind the stand so they do not snag when the laptop moves. Remove the laptop from the stand before adjusting the height or angle, as OMOTON lists for the LA10.
FAQ
How high should my laptop screen sit?
With the top of the screen near eye level, so the gaze lands on the middle of the screen. The stands here lift the screen from 0.79 to 4.72 inches on the LA19 and from 1.8 to 10.4 inches on the LA10, while the Beimu riser holds it 4 inches up on a fixed base. Pick the lift that puts the top of the screen near eye level at the desk.
Do I need a separate keyboard with a laptop stand?
Yes, once the screen is at eye level the laptop keyboard sits too high to type on comfortably. OMOTON recommends an external keyboard during intense typing on its LA19 stand. A separate keyboard and mouse let the screen stay high while the hands rest level.
What size laptop fits a laptop stand?
Check the range the listing states: the LA19 fits laptops from 10 to 15.6 inches and the LA10 fits laptops from 11 to 17 inches. The Beimu riser states it holds up to 60 lbs and fits monitor screens up to 38 inches, so it covers a laptop and a monitor on the same base. Measure the laptop across the screen as the maker states it.
Can a laptop stand travel with the laptop?
Yes, if it folds flat: the LA10 folds to 11.4 x 1.7 inches and weighs 840 g (1.85 lb), and the LA19 folds to 0.7 inch thick, slim enough to slide into a backpack, briefcase or tote. The LA10 comes with a storage pouch for the trip. A fixed riser like the Beimu suits a desk that never moves instead.
More for your workspace
See the best ergonomic laptop stands for desks, the laptop stand size guide, the best standing desks for working from home and every Monitor Mounts, Keyboards and Mice guide.





