Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Monitor Arms and Stands

Four Monitor Setup: Gear and Layout Guide

A four monitor setup puts four screens on one quad mount; this guide covers layouts, size and weight fit, desk thickness, height and angles, and cable routing.

Four Monitor Setup: Gear and Layout Guide

A four monitor setup puts four screens on one quad mount, so a morning call, a spreadsheet, email and a chat window each get a screen while the desk underneath stays clear for a keyboard, a notebook and a coffee mug. The guide below walks through the layouts that work, the fit checks to run before buying a mount, and the cable routing that keeps four screens tidy.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

A four monitor setup is four screens held by one quad mount, usually a pole with arms that clamp or bolt to the desk, or a freestanding base on the desk. Most quad mounts in the listings fit screens from 17 to 32 in and hold up to 22 lbs per arm, with VESA 75x75mm or 100x100mm mounting holes on the back of each screen. Wider rigs exist: one VIVO mount holds a 49 in ultrawide on top, and one PUTORSEN mount holds a 49 in screen above three 27 in screens. Check the size, weight and VESA pattern of each screen against the mount listing before buying.

Four monitor setup layouts that work

Three layouts cover most desks. A row of four screens side by side suits wide desks and gives every screen the same height; the VIVO STAND-V104G (on Amazon) spans 69.8 in across. A stacked layout puts one screen above three and fits a narrower desk: the PUTORSEN mount holds a 49 in ultrawide above three 27 in screens, and the VIVO mount fits one screen up to 49 in and two screens up to 38 in. A two-by-two grid keeps every screen close when the pole is tall enough: HUANUO poles run 33.8 in and 34.25 in tall, and one VIVO mount adjusts screen height up to 14.5 in. Mixed sizes work too, as long as each arm stays within its stated weight limit.

Step 1: Check your screens fit the mount

Every quad mount lists three fit numbers, and a screen has to pass all three at once: screen size, screen weight and VESA pattern. Sizes run from 13 to 34 in on the widest HUANUO mount, most quad mounts cover 17 to 32 in, and the VIVO ultrawide mounts stretch to 49 in for a single top screen. Weight limits run from 4.4 to 22 lbs per arm on the HUANUO mount and up to 17.6 lbs per screen on the VIVO STAND-V400G (on Amazon), while the PUTORSEN mount holds up to 44 lbs on its top arm and up to 15.4 lbs on each lower arm. VESA patterns are 75x75mm or 100x100mm on every listing here, so check the holes on the back of each screen and match them to the mount.

Mount Screen size Weight per arm VESA
monTEK quad stand 17 to 32 in Up to 22 lbs 75x75mm or 100x100mm
HUANUO quad mount 13 to 34 in 4.4 to 22 lbs 75x75mm or 100x100mm
VIVO STAND-V400G 17 to 32 in Up to 17.6 lbs 75x75mm or 100x100mm

Step 2: Check the desk and the base

A clamp mount grips the back edge of the desk, a grommet mount bolts through a hole in it, and a freestanding stand sits on the desk on its own base. Clamps in the listings fit desks from 0.39 in to 3.14 in thick, so measure the desk edge before ordering: the VIVO STAND-V400G clamp fits desktops up to 3.25 in thick, the PUTORSEN clamp fits 0.39 in to 3.14 in, and the HUANUO clamp fits 0.39 in to 2.95 in for wood desks. Grommet mounting fits thinner desks: 0.39 in to 1.97 in on the HUANUO mount and up to 1.57 in on the PUTORSEN mount. If the desk has an irregular edge, the HUANUO listing warns against clamp mounting, so the monTEK freestanding V-shaped base model avoids the edge question entirely.

Step 3: Set the height and angles

Set the screens so the top of each screen sits near eye level and the middle is easy to look at without tipping the head far up or down. Tilt runs from -45 degrees to +45 degrees on the monTEK mounts to +55 degrees to -25 degrees on the VIVO STAND-V400D, with swivel from -90 degrees to +90 degrees and rotation of 360 degrees for portrait or landscape. Gas spring arms let the screen move by hand: the PUTORSEN mount offers a 52 in gas spring extension, the VIVO STAND-V104G adjusts height up to 14.5 in, and the HUANUO pole stands 33.8 in tall. Set the main screen straight ahead, then angle the side screens toward the seat.

Step 4: Route the cables and power

Four screens mean four power cords and four video cables, plus the cables for the computer itself, so plan the routing before mounting the screens. Most quad mounts here include cable clips or organizers along the arms and pole: the monTEK mount has integrated cable organizers, the HUANUO mount has cable management clips, and the VIVO STAND-V104G has integrated cable clips along each arm and the center pole. Route each screen’s cables along its own arm, leave slack for tilt and swivel, and gather the bundle at the pole. A docking station for four monitors can cut the cable count from the computer side, and a cable management kit for a monitor arm adds clips where the mount has none.

FAQ

What size monitors fit a four monitor setup?

Most quad mounts in the listings fit screens from 17 to 32 in and hold up to 22 lbs per arm, with VESA 75x75mm or 100x100mm holes. Wider mounts fit a 49 in ultrawide on top, and the widest HUANUO mount covers screens from 13 to 34 in.

Do all four monitors need the same VESA pattern?

No. Every listing here accepts both 75x75mm and 100x100mm patterns, so a mix of screens works as long as each screen has one of the two patterns.

Can I mix an ultrawide with smaller screens?

Yes. The VIVO STAND-V400D fits one screen up to 49 in with smaller screens beside it, and the PUTORSEN mount holds a 49 in screen above three 27 in screens.

How thick can my desk be for a clamp mount?

It depends on the mount: the VIVO STAND-V400G clamp fits desktops up to 3.25 in thick, the PUTORSEN clamp fits 0.39 in to 3.14 in, and the HUANUO clamp fits 0.39 in to 2.95 in for wood desks.

More for your workspace

See the monitor arms and stands guides, the best monitor arms under 50, the best VESA monitor stands, the best docking stations for quad monitors, the best standing desks for four monitors and the best computer desks for multiple monitors.