Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Monitor Arms and Stands

Monitor Setup for Trading: Screens, Arms and Layout

A trading setup puts charts, orders and news on two or three screens at eye level, held on adjustable arms with cables routed out of the way.

Monitor Setup for Trading: Screens, Arms and Layout

A trading desk works when charts, orders and news sit where you can see them all at once, and monitor setup for trading comes down to two or three screens at eye level, held on arms that let each screen tilt and turn, with cables routed out of the way. Start with the screen count and layout, then the arms, then the height and angle of each screen.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer: monitor setup for trading

Two screens cover most trading desks: one for charts, one for orders and news. Hold them on a dual arm when the desk suits a clamp or a freestanding base, and add a single arm when a third screen joins later. Set the top of each screen at or slightly below eye level, tilt each screen until glare drops away, and route the cables along the arms so the desk stays clear for the keyboard and notes.

How many screens for trading

One screen forces charts, orders and news to share space, so two is the usual starting point and three suits a trader who watches several markets at once. Dual arms hold two screens: the WALI dual stand fits 13 to 27 inch screens at 22 lbs per arm, the HUANUO dual stand fits 13 to 32 inch screens at 22 lbs per arm, the ErGear dual stand fits 17 to 33 inch screens at 4.4 to 22 lbs per arm, and the HUANUO FlowLift Pro fits 13 to 27 inch screens at 4.4 to 15.4 lbs per arm. A third screen goes on a single arm: ErGear lists a single arm for 13 to 34 inch screens at 4.84 to 19.8 lbs, HUANUO lists one for 13 to 32 inch screens at 4.4 to 19.8 lbs, WALI lists a tall single arm for 13 to 34 inch screens up to 22 lbs, and 5Rcom lists one for 13 to 35 inch screens at 4.4 to 22 lbs. Check the weight of each screen against the arm, since a heavy ultrawide can pass the size limit while failing the weight limit.

Check the VESA pattern first

Every arm here mounts on VESA 75x75mm or 100x100mm, so check the hole pattern on the back of each screen before buying. ErGear states the same check in its listing: verify the screen size, weight and VESA pattern before purchase. A screen without VESA holes will not mount on these arms, so confirm the pattern on the screen as well as the size and weight.

Pick the arm: clamp, grommet or freestanding

Three mounts cover most desks. A C-clamp grips the desk edge and needs no holes: ErGear lists a C-clamp for desks 0.39 to 2.56 in thick, and HUANUO lists one for wood desks 0.59 to 3.54 in thick. A grommet mount drops through a hole in the desk: ErGear lists grommet mounting for desks 0.39 to 2.95 in thick on its single arm and 0.39 to 2.17 in thick on its dual arm. A freestanding base needs neither clamp nor hole: the HUANUO dual stand sits on an 11.8 by 16.5 in tempered glass base, and the WALI dual stand uses a freestanding V-base. The WALI tall single arm lists both a C-clamp and a 3.5 in diameter grommet base for a 3 in thick desk. Measure the desk thickness and check the underside for beams or panels before choosing, since a clamp cannot grip where a beam sits.

Set the height and angle

Height comes first: the top of each screen should sit at or slightly below eye level, so raise the arm until the screens meet that line. ErGear lists height adjustment up to 17.5 in on its single and dual arms, 5Rcom lists up to 17.7 in, and the WALI tall single arm stands on a 31.5 in pole while the WALI dual stand uses a 16 in pole and the HUANUO dual stand uses an 18.7 in pole. Tilt takes the glare off: ErGear lists +80 to -50 degrees of tilt, HUANUO lists -50 to +85 degrees, 5Rcom lists -45 to +90 degrees, and Hemudu lists -10 degrees down and +15 degrees up. Swivel turns a screen toward a second seat: most arms here list ±90 degrees of swivel, and the HUANUO dual stand lists 180-degree swivel. Rotation turns a screen to portrait for a long watchlist: each arm here lists 360-degree rotation. Set the main screen straight ahead and angle the side screens in, then sit back and check that each screen reads clearly from your chair.

Cables and desk space

Arms lift the screens off the desk, which frees the space below for the keyboard, notes and a docking station. Route each cable along its arm with the clips the arm provides: ErGear, 5Rcom and WALI all list built-in cable management, and HUANUO lists cable clips on its single arm. Keep power and video cables apart where you can, and leave a little slack at the arm joint so the screen can tilt and swivel without tugging a plug loose. A tidy desk matters more as screens multiply: two screens need two sets of cables, and a third screen adds a third set.

FAQ

How many monitors for a trading desk?

Two cover most desks: one for charts, one for orders and news. A third screen suits a trader who watches several markets at once, and it goes on a single arm beside the dual pair.

What size monitors work on a dual arm?

It depends on the arm: the WALI dual stand and the HUANUO FlowLift Pro fit 13 to 27 inch screens, the HUANUO dual stand fits 13 to 32 inch screens, and the ErGear dual stand fits 17 to 33 inch screens. Check the weight too: most dual arms here hold 22 lbs per arm, while the FlowLift Pro holds 15.4 lbs per arm.

Can monitors mount on a glass desk?

Yes, with a freestanding base. The HUANUO dual stand sits on a tempered glass base and needs no clamp or drilling, and it lists two setup options: freestanding on the desktop, or grommet-mounted in one set position.

How much weight can a monitor arm hold?

Single arms here hold 4.84 to 19.8 lbs, 4.4 to 19.8 lbs, up to 22 lbs, or 4.4 to 22 lbs, while the Hemudu single arm holds up to 77 lbs. Dual arms hold 22 lbs per arm, except the HUANUO FlowLift Pro at 15.4 lbs per arm. Check each screen against the arm before buying.

More for your workspace

See every Monitor Arms and Stands guide and all Monitor Mounts, Keyboards and Mice guides.

More picks: best monitor arm under 50, best monitor stand VESA, monitor stand size guide, best cable management for monitor arm.