Portable monitor setup starts on a morning when the laptop screen feels too small for the work open on it, with a video call filling the screen and notes waiting for room. A portable monitor adds a screen that rides along in a laptop bag, unfolds on a kitchen table or a hotel desk, and stands beside the laptop on a small stand. This guide walks through the parts of that setup: the stand, the cable, the height and the layout.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
A portable monitor setup is a second screen held by a small stand and linked to a laptop by cable, so the laptop gains room for a second window without a full monitor arm. Pick a stand that fits the screen size and weight, set the screen at eye level beside the laptop, and route the cable so it stays clear of the keyboard. The steps below cover each part in order, with the figures the listings state.
Portable monitor setup at a glance
| Stand | Screen size it fits | Height it reaches | Weight it holds |
|---|---|---|---|
| TabHolderix clamp stand | 4.7 to 17 in | 10.8 to 17.3 in | 4.4 lbs |
| Bestoct clamp stand | 4.7 to 18.5 in | Not stated | 4.5 lbs |
| AiFeelife magnetic tripod | 4.7 to 18.5 in | Up to 19.7 in | 4.4 lbs |
| HAUYOCEP magnetic tripod | 4.7 to 18.5 in | 7.4 to 20.7 in | 4.4 lbs |
| Urmust magnetic tripod | 4.7 to 15.6 in | Up to 24.8 in | 1.98 lb |
| COOPER weighted base | 15.6 to 17 in | 7 to 10 in | 4.4 lb |
The table uses the figures each listing states. A clamp stand grips the edges of the screen, a magnetic tripod holds it with a plate stuck to the back, and a weighted base holds it in a cradle, so the right type depends on the screen and the desk it will sit on.
Step 1: Match the stand to the screen size
Start with the screen size. Most stands listed here fit screens from 4.7 to 18.5 in, which covers the common 15.6 in and 17.3 in portable monitors, while the TabHolderix clamp stand fits screens from 4.7 to 17 in and the Bimo stand (on Amazon) fits screens from 4 to 18.5 in. The Jakeko clamp stand fits screens from 6.5 to 18.5 in, so a small tablet may sit loose in a clamp made for a larger screen. A clamp stand also has a width and thickness limit: the TabHolderix clamp fits a device from 4.92 to 9.84 in wide and up to 0.67 in thick, so measure the screen before ordering. The Jakeko magnetic model lists 8.3, 13.3, 14.1, 15.6, 16, 17.3 and 18.5 in screens and includes a VESA 75x75mm plate for monitors with standard VESA mounting holes. For more on sizing, see the monitor stand size guide.
Step 2: Check the weight the stand holds
Next, check the weight the stand holds against the weight of the screen. The figure 4.4 lbs turns up across the listings here: the TabHolderix, AiFeelife, HAUYOCEP, COOPER and Jakeko stands each list a 4.4 lbs capacity, and the Bestoct stand (on Amazon) lists 4.5 lbs. The Bimo stand lists a 1 kg capacity, which the listing gives as 2.2 lbs, and the Urmust stand (on Amazon) lists 1.98 lb, so a heavier screen belongs on one of the 4.4 lbs stands. The weight of the stand itself matters when the setup travels: the AiFeelife tripod (on Amazon) weighs 0.5 lbs, the Urmust tripod weighs 0.48 lb, the TabHolderix stand (on Amazon) weighs 1.2 lbs and the Bestoct stand weighs 1.52 lbs, while the Jakeko clamp stand has a 1.9 lbs counterweighted base that keeps it planted during touchscreen use.
Step 3: Set the height and angle
Set the screen so the top of it sits at or near eye level. The height ranges in the listings run from 7 to 10 in on the COOPER base, 10.8 to 17.3 in on the TabHolderix stand, 7.4 to 20.7 in on the HAUYOCEP tripod, up to 19.7 in on the AiFeelife tripod and up to 24.8 in on the Urmust pole. A taller range suits a setup where the portable screen sits above the laptop: the Urmust listing describes tilting the laptop screen back and nesting the front leg behind it for a compact stacked setup. For angle, the TabHolderix stand turns 360 degrees and tilts 45 degrees, the COOPER stand tilts 270 degrees, and the Jakeko magnetic model turns its base 360 degrees with a 180 degree lower arm. The same 360 degree turn switches the screen between landscape and portrait, which suits long documents and code. See the monitor height and distance guide for more on placement.
Step 4: Connect the cable
Connect the monitor to the laptop with the cable the monitor ships with, then add power if the monitor needs a separate power cable. The Jakeko magnetic stand has cable clips along the arm that route HDMI and power cables, which keeps the cables off the desk and out of the way of the keyboard. When the laptop has a single spare port, a hub or docking station can join the monitor, the power cable and other desk gear through one connection; the docking station guide compares the options. If the cable in the box is too short for the layout, the USB-C cable types guide explains the cable types to look for. Leave some slack in the cable so moving the stand does not tug the port.
Step 5: Place the second screen
Place the portable screen beside the laptop at the same height, with the edges close together so the eye moves across without a gap. The dual monitor setup guide covers side-by-side layouts. A stacked layout puts the portable screen above the laptop screen, which suits a small desk: the Urmust listing describes that stacked setup, and the stacked monitor setup guide shows the layout. For reading long documents, turn the screen to portrait with the 360 degree rotation and read down the page; the vertical monitor setup guide covers portrait orientation. Whichever layout you pick, keep the portable screen at the same height as the laptop screen so the eye does not jump between levels.
Packing the setup for travel
A travel setup has to fold small and weigh little. The AiFeelife tripod folds to 8.3 in and weighs 0.5 lbs, the Urmust tripod folds to 8.85 in and weighs 0.48 lb and comes with a carrying sleeve, and the HAUYOCEP tripod folds to 18.1 cm in height and weighs 228 g. The Bestoct and Jakeko clamp stands fold flat to 2.2 in thick, and the Bestoct stand weighs 1.52 lbs. The TabHolderix stand sets up in 30 seconds and folds in 1 second with no tools, and the Urmust legs open with a tap on the release button. Pack the stand in the same bag as the laptop so the parts stay together, and keep the metal plates and rings in the sleeve so they do not get lost.
FAQ
What size portable monitor fits these stands?
Most stands listed here fit screens from 4.7 to 18.5 in, and the Bimo stand fits screens from 4 to 18.5 in. Check the width and thickness limits on a clamp stand: the TabHolderix clamp fits a device from 4.92 to 9.84 in wide and up to 0.67 in thick.
How do I use a portable monitor as a second screen?
Set the monitor on its stand beside the laptop, connect the cable for video and power, then arrange the screens in the laptop display settings so the portable screen sits beside the main screen. Move the mouse across the join to check the order, and swap the sides in the settings if the screens sit the wrong way round.
Can a portable monitor stand hold a 15.6 in monitor?
Yes, most stands listed here fit a 15.6 in screen. Check the weight as well as the size: the Urmust stand holds up to 1.98 lb, while the TabHolderix, AiFeelife, HAUYOCEP, COOPER and Jakeko stands each hold up to 4.4 lbs.
Do I need a VESA mount for a portable monitor stand?
No. Most stands here grip the screen with a clamp or hold it with a magnetic plate stuck to the back. The Jakeko magnetic model also includes a VESA 75x75mm plate for monitors with standard VESA mounting holes, and the Urmust plate needs two hours for the adhesive to set.
More for your workspace
See the monitor setup guide, the monitor stand size guide, the dual monitor setup guide and every computer peripherals guide.





