Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Monitor Mounts, Keyboards and Mice

Stacked Monitor Setup: How to Stack Two Monitors

Stacked monitor setup explained: two monitors, one above the other, with the mount and riser options, size and weight checks, and the steps to set the angle.

Stacked Monitor Setup: How to Stack Two Monitors

A morning call starts with a dim webcam, a laptop running everything off a hub and an extra screen balanced on a stack of books at the edge of the desk. A stacked monitor setup replaces that wobble with monitors arranged vertically on a vertical mount or stacked risers. The lower screen carries the main work and the upper screen holds the reference window, and the choice comes down to monitor size and weight, the VESA pattern and desk depth.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Stacked monitor setup: the quick answer

A stacked monitor setup puts the second monitor above the first instead of beside it, which keeps desk width free and puts both screens in front of the chair. The two common ways to build one are a vertical monitor mount that clamps to the desk, and a pair of stacked risers that lift the upper monitor above the lower one. Check the size and weight of each monitor first, then the VESA pattern and the desk depth, and only then choose the mount or the risers. The dual monitor setup guide covers the side-by-side layout for comparison.

Two ways to stack monitors

The listings show two options: a vertical mount and stacked risers.

Approach How it holds the monitors Stated limits Adjustment
Vertical mount Clamps to the desk, holds 2 monitors 17 to 32 inch monitors, up to 17.6 lbs each Tilt -45 to +45 degrees, swivel -60 to +60 degrees, 360 degree rotation
Stacked risers Two stands, one on the other Holds 80 lbs, 3 3/8 in single, 6 3/4 in stacked Set heights, wooden pins
Stackable riser One stand on another Holds up to 44 lbs, 2.5 to 3 1/8 in Twist legs to adjust height

The HUANUO mount (on Amazon) fits monitors from 17 to 32 inches and holds up to 17.6 lbs per monitor, with VESA 75x75mm or 100x100mm patterns and a clamp or grommet base for desk thickness up to 3.14 inches. The TEAMIX 2-pack stacks (on Amazon) to 6 3/4 inches and holds 80 lbs, while a single stand is 3 3/8 inches high. The Husky Mounts riser (on Amazon) adjusts from 2.5 inches to 3 1/8 inches, holds up to 44 lbs and stacks one stand on another. Read the spec table twice: the Husky title and bullets state a maximum height of 3 1/8 inches while the spec table lists 3.25 inches, so trust the bullets.

Step 1: Check the monitors against the mount or riser

Start with the monitors. The HUANUO mount fits screens from 17 to 32 inches and holds up to 17.6 lbs per monitor, so weigh each monitor and measure the screen size before ordering. Check the VESA pattern on the back of each monitor: the mount lists VESA 75x75mm or 100x100mm. Check the desk as well: the mount uses a clamp or grommet base for desk thickness up to 3.14 inches. A riser has no VESA check, so match the riser to the monitor base: the WALI shelf measures 14.6 x 9.3 inches and holds up to 44 lbs, and the TEAMIX stands measure 14 x 9 1/2 inches and hold 80 lbs. The best monitor stand Vesa guide compares stands by VESA fit.

Step 2: Set the lower monitor first

Place the lower monitor first and set its height before adding the upper screen. On a vertical mount, set the lower monitor at the bottom of the mount and the upper monitor above it. On stacked risers, set the lower monitor on the desk and the upper monitor on the riser. The lower screen should sit with the top of the screen at or slightly below eye level, and the upper screen should sit above it, tilted down toward the chair.

Step 3: Set the upper monitor and the angle

With the lower monitor set, add the upper monitor. The HUANUO mount rotates 360 degrees, tilts from -45 to +45 degrees and swivels from -60 to +60 degrees, so turn the upper screen to face the chair and tilt it down until the screen is readable from the chair. On stacked risers there is no angle adjustment, so set the height instead: the WALI riser offers heights of 4.5, 5.3 and 6.1 inches, the TEAMIX stands stack to 6 3/4 inches, and the Husky riser adjusts from 2.5 to 3 1/8 inches. If the upper screen sits too high to read, lower the riser or the mount rather than raising the chair.

Step 4: Route cables and clear the desk

Stacked monitors put the cables for both screens on one part of the desk, so route them before the setup is finished. The BONTEC riser (on Amazon) includes cable management slots, and the Ekisemio riser (on Amazon) has a pull-out fabric drawer measuring 13 x 9 x 2.5 inches for small office accessories. The Husky riser leaves 11.75 inches of clearance between its legs, and the WESTREE stand measures 35.8 x 10.2 inches with storage space underneath for office supplies. Leave slack in each cable so the upper monitor can tilt without pulling its cord. The best cable management for monitor arm guide compares clips and channels for monitor arms.

Weight limits and what the listings state

Every riser and mount in the listings states a weight limit. The TEAMIX stands hold 80 lbs, the WALI risers and the Husky riser hold up to 44 lbs each, the Mind Reader stand holds up to 30 lbs, and the CTTZCKJ riser blocks hold 100 lbs across 4 corners. The HUANUO mount holds up to 17.6 lbs per monitor. A riser limit covers the monitor on top of it, while the mount limit covers each monitor on the arm. Check the weight of the upper monitor against the riser limit, and check each monitor against the mount limit on its own.

FAQ

Can any monitor be stacked?

No. The HUANUO mount fits monitors from 17 to 32 inches and holds up to 17.6 lbs per monitor, with VESA 75x75mm or 100x100mm patterns. Check the size, the weight and the VESA pattern on the back of each monitor before choosing a mount or risers.

How high should the upper monitor sit?

High enough to clear the lower monitor, and low enough to read from the chair. The WALI riser offers heights of 4.5, 5.3 and 6.1 inches, the TEAMIX stands stack to 6 3/4 inches, and the Husky riser adjusts from 2.5 to 3 1/8 inches. Set the height, then set the tilt.

Do stacked risers hold two monitors?

The TEAMIX 2-pack holds 80 lbs and stacks to 6 3/4 inches for two monitors, and the Husky riser holds up to 44 lbs and stacks one stand on another. The WALI 2-pack includes two 14.6 x 9.3 inch shelves. Check the weight of each monitor against the stated limit.

What desk depth does a stacked setup need?

Measure the desk against the riser or mount base before ordering: the WALI shelf measures 14.6 x 9.3 inches, the TEAMIX stands measure 14 x 9 1/2 inches and the Husky riser measures 14.5 x 9.25 inches. Leave room behind the monitors for cables.

Can I stack monitors with risers instead of a mount?

Yes. The TEAMIX 2-pack stacks to 6 3/4 inches and holds 80 lbs, and the Husky riser adjusts from 2.5 to 3 1/8 inches, holds up to 44 lbs and stacks one stand on another. The CTTZCKJ blocks lift 1.4 to 2.4 inches and stack in pairs across 4 corners.

More for your workspace

See the best monitor arm for ultrawide, the best monitor stand Vesa, the dual monitor setup guide, the 3 monitor setup guide and all computer peripherals guides.