A 3 monitor setup spreads a crowded home desk across three screens on one mount, so a call, notes and a spreadsheet each have a place and the laptop lid can stay shut. The work below walks through the mount, the monitors, the desk and the layout, step by step.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
A 3 monitor setup needs three screens, one triple mount that holds them, and a desk the mount can grip. Check the screen size, the weight per arm and the VESA pattern on the monitors first, then check the desk thickness against the clamp or grommet range. Pick a layout, set the height and angles, then route the cables.
What a triple mount holds
Triple mounts list the screen size, the weight each arm holds and the VESA pattern they fit. The table below lines up 4 mounts from the listings, so the ranges can be compared at a glance.
| Mount | Screens | Weight per arm | VESA |
|---|---|---|---|
| Mount-It! MI-2753BLK | 13 to 32 in | 17.6 lbs | 75×75, 100×100 |
| MOUNT PRO triple mount | 13 to 32 in | up to 19.8 lbs | 75×75, 100×100 |
| WALI MF003 | 13 to 27 in | 22 lbs | 75×75, 100×100 |
| VIVO STAND-V300GW | 17 to 32 in | 17.6 lbs | 75×75, 100×100 |
Planning a 3 monitor setup that fits the desk
A triple mount needs a desk edge it can grip and room behind it for the pole and arms. Measure the desk thickness where the clamp will sit, check whether the desk has a grommet hole, and leave room at the back for cables. The steps below run through the checks in order.
Step 1: Match the mount to the monitors
Start with the three screens. Most triple mounts in this guide fit screens from 13 to 32 inches, while the WALI MF003 (on Amazon) and the STANDOPIA mount (on Amazon) fit screens up to 27 inches, and the VIVO mount fits screens from 17 to 32 inches. Check the weight of each screen against the weight per arm: the Mount-It! and VIVO arms hold up to 17.6 lbs each, the MOUNT PRO and MOUNTUP arms hold up to 19.8 lbs each, and the WALI and STANDOPIA arms hold up to 22 lbs each. Check the VESA pattern on the back of each screen: every mount here takes VESA 75x75mm or 100x100mm. Curved screens need a second look: the MOUNT PRO mount states it is not compatible with 1000R curved screens.
Step 2: Check the desk
Two mounting styles cover most desks. A C-clamp grips the desk edge, and a grommet base drops through a hole in the desktop. The Mount-It! clamp fits desks up to 3.3 inches thick, with a grommet base for a 1 to 2.4 inch opening. The MOUNT PRO and MOUNTUP clamps fit desks from 0.39 to 3.15 inches thick, with grommet bases for desks from 0.39 to 1.97 inches thick. The VIVO C-clamp fits surfaces up to 3.25 inches thick, and the STANDOPIA C-clamp fits desks from 0.4 to 2.4 inches thick. Thin desktops need care: the MOUNT PRO listing recommends a reinforcement plate for a heavy monitor or a thin desktop, and the MOUNTUP listing gives the same advice for a thin table. Desks built for three screens help too: see the computer desks for 3 monitors guide for desks sized for this layout.
Step 3: Pick the layout
Three screens can sit side by side, stack with one above two, or turn one vertical for reading. Side by side suits wide work, with the middle screen straight ahead and the side screens angled in. A stacked layout puts one screen above the middle screen for chats, mail or monitoring. Rotation turns a screen from landscape to portrait: every mount here rotates 360 degrees, so any of the three screens can stand vertical. The MOUNT PRO mount also works as a 3-arm stacked mount, with the arms arranged in a triangle.
Step 4: Set the height and angles
Set the middle screen first, then bring the side screens to the same height. One MOUNT PRO mount has a 28 inch pole with a maximum height of 36.3 inches, and the arms extend up to 18.1 inches. The other MOUNT PRO mount hovers with an adjustable height of 11.4 inches, and the WALI pole is 16 inches tall. Tilt, swivel and rotation shape the rest: the MOUNT PRO arms tilt from +90 degrees to -90 degrees, swivel 180 degrees and rotate 360 degrees, while the STANDOPIA arms tilt from +35 degrees to -35 degrees, swivel 180 degrees and rotate 360 degrees. The WALI center monitor tilts +/-15 degrees and the side monitors tilt +/-90 degrees.
Step 5: Route cables and power
Three screens mean three power cables and three video cables, plus the cables for the keyboard, mouse and dock. Every mount here has cable management built in: the MOUNT PRO, MOUNTUP, WALI and ErgoFocus mounts (on Amazon) route cables through the arms or along clips, and the Mount-It! base adds USB-A and USB-C ports for charging and peripherals. A docking station for laptop and 3 monitors keeps the laptop connected to all three screens through one cable. Leave slack in each cable so the arms can tilt and swivel without pulling. Assembly is quick: the MOUNTUP mounts take less than 20 minutes from box to use, and the MOUNT PRO mount takes 10 minutes. For the cable runs themselves, see the cable management for three monitors guide.
FAQ
What size monitors fit a triple monitor mount?
Most triple mounts here fit screens from 13 to 32 inches, with VESA 75x75mm or 100x100mm patterns. The WALI and STANDOPIA mounts fit screens up to 27 inches, and the VIVO mount fits screens from 17 to 32 inches. Check the size, weight and VESA pattern of each screen before ordering.
How much weight can each arm hold?
The Mount-It! and VIVO arms hold up to 17.6 lbs each, the MOUNT PRO and MOUNTUP arms hold up to 19.8 lbs each, and the WALI and STANDOPIA arms hold up to 22 lbs each. Weigh each screen, or check the weight on the maker listing, and match it to the arm.
Do triple monitor mounts fit any desk?
No. Check the desk thickness against the clamp range: the Mount-It! clamp fits desks up to 3.3 inches thick, the MOUNT PRO and MOUNTUP clamps fit desks from 0.39 to 3.15 inches thick, and the VIVO clamp fits surfaces up to 3.25 inches thick. A grommet base needs a hole in the desktop, with ranges from 0.39 to 1.97 inches thick on the MOUNT PRO and MOUNTUP mounts.
Can one monitor turn vertical in a 3 monitor setup?
Yes. Every mount here rotates 360 degrees, so any screen can turn from landscape to portrait. Set the vertical screen on the side, and check that its height clears the desk and the screens beside it.
More for your workspace
See every monitor arms and stands guide and all computer peripherals guides.
More picks: computer desks for 3 monitors, corner desks for three monitors, cable management for three monitors and monitor arms for gaming.





