A regular mouse keeps your hand flat on the desk all day. A vertical mouse turns the grip upright, so your hand rests as if you are shaking hands with the mouse. This guide shows how to use vertical mouse: how to hold it, how to connect it, how to set the pointer speed and how to keep it charged.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Hold the mouse with your hand upright in a handshake grip, thumb on the side rest and fingers on the buttons. Connect it by Bluetooth or the included USB receiver, set the pointer speed to a low DPI level to start, and charge it by USB-C when the battery runs low. The steps below cover each part in order.
Step 1: Check the fit
Vertical mice come in sizes for different hands, so check the fit before you settle in. The ProtoArc is built for hand lengths under 7.5 in and asks you to measure before ordering. The Logitech Lift fits small to medium right hands, the AOC fits small to medium hands and is not recommended for large hands, and the Lekvey is recommended for medium or large hands. If your hand is larger than the size the listing names, look at a mouse that lists your hand size. See the best ergonomic mice for small hands for more small-hand options.
Step 2: How to use vertical mouse with a handshake grip
A vertical mouse stands the grip on its side, so your hand rests upright instead of flat. Hold it as if you are shaking hands: palm against the side of the mouse, thumb on the thumb rest, index and middle fingers on the left and right buttons. The Logitech Lift lists a 57-degree angle, the AOC lists a 52-degree angle and the ProtoArc lists a 58-degree angle, and each one keeps the hand in that handshake position. Your hand should rest on the mouse without reaching for the buttons: the Logitech Lift puts 4 of its 6 buttons within reach for customizing, the JYKEYMOUT has 6 silent buttons with Back and Forward buttons, and the AOC has 6 programmable buttons.
Step 3: Connect it
Most vertical mice connect by Bluetooth or a USB receiver, and some add a wired mode. The Logitech Lift connects by Bluetooth Low Energy or the included Logi Bolt USB-A receiver, the JYKEYMOUT switches between Bluetooth and a 2.4GHz USB receiver, and the Lekvey uses one nano USB receiver with plug and play and no Bluetooth pairing or drivers needed. The AOC supports Bluetooth 5.4, a 2.4GHz wireless receiver and a USB wired connection, and the Razer connects by 2.4GHz, Bluetooth or a USB-C wired mode. One mouse can serve more than one computer: the JYKEYMOUT connects to 2 devices at once, the AOC switches across up to 3 devices, and the Razer connects to up to 5 devices. See the mice and mouse pads guides for more pointing-device options.
Step 4: Set the pointer speed
DPI sets how far the pointer moves for a given hand movement: a higher DPI moves the pointer farther. The AOC adjusts across 1000 to 4800 DPI, the ProtoArc switches between 1000 and 2400 DPI, and the JYKEYMOUT and Lekvey list 1000 to 1600 DPI and 800 to 1600 DPI. Start at 1000 DPI and move up if the pointer feels slow. The table below lists the angles and DPI levels the listings state.
| Mouse | Vertical angle | DPI levels |
|---|---|---|
| Logitech Lift | 57 degrees | Not stated |
| AOC | 52 degrees | 1000 to 4800 |
| ProtoArc EM11 NL | 58 degrees | 1000 to 2400 |
| JYKEYMOUT | Not stated | 1000 to 1600 |
| Lekvey | Not stated | 800 to 1600 |
The angle is set by the shape of the mouse, so pick the angle that matches the grip you want and set the DPI to match the work: lower DPI for careful pointing, higher DPI for moving across a wide screen.
Step 5: Charge it and save power
Battery life runs from hours to years across the listings. The Logitech Lift lists up to 2 years of battery life, the Razer runs for up to 6 months and gives 3 working days of use from 5 minutes of charge, and the Logitech MX Vertical averages 4 months. The AOC runs for up to 200 hours without RGB and 40 or more hours with RGB on, the ProtoArc gives up to 100 hours of use and up to 200 days of standby after about 2 hours of charging, the JYKEYMOUT runs for about 1 to 3 months per charge, and the Lekvey runs for about 3 to 4 weeks with 8 to 10 hours of daily use. Charge by USB-C: the AOC, ProtoArc, JYKEYMOUT and Lekvey all charge by Type-C, and the AOC shows the battery percentage on its LED display. When the mouse sits idle, it saves power on its own: the JYKEYMOUT enters power-saving mode after 10 minutes idle, and the Lekvey has an auto sleep mode.
FAQ
How long does it take to get used to a vertical mouse?
Give it a few days. The Lekvey listing mentions a 3 to 5 day adjustment period, so use the mouse for daily work through that period before you judge the grip. If the size feels wrong after that, check the hand-size figures in Step 1.
What DPI should I use on a vertical mouse?
Start at 1000 DPI. The listings here range from 800 DPI on the Lekvey to 4800 DPI on the AOC, so there is room to move up once the grip feels natural.
Can I connect a vertical mouse to more than one computer?
Yes, if the listing states it. The JYKEYMOUT connects to 2 devices at once, the AOC switches across up to 3 devices, and the Razer connects to up to 5 devices.
How long does the battery last on a vertical mouse?
It depends on the model. The Logitech Lift lists up to 2 years of battery life, the Razer runs for up to 6 months, the Logitech MX Vertical averages 4 months, and the AOC runs for up to 200 hours without RGB. Rechargeable models charge by USB-C, and the ProtoArc gives up to 100 hours of use per charge.
Do vertical mice work with Mac and Windows?
Yes. The Logitech Lift works with Windows and Mac, the JYKEYMOUT works with Windows, Mac, Chrome, Linux and Android, and the AOC lists PC and Mac while the Lekvey lists Windows and Mac. Check the listing for your system before you buy.
More for your workspace
See every computer peripherals guide, the best ergonomic mice for home office, the best mouse pads and the best ergonomic mice under 35.





