Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Office Chairs

Ergonomic Office Chair Setup: Step-by-Step

Set the seat, backrest, armrests and footrest in order, then line up the desk and monitor for an ergonomic office chair setup that fits your body and your desk.

Ergonomic Office Chair Setup: Step-by-Step

The morning call starts with a dim webcam, a chair that sinks as the day goes on, and a laptop running everything off a hub on a kitchen table. An ergonomic office chair setup sorts that mess out by matching the chair to the person sitting in it and to the desk in front of it. The order matters: seat height, backrest, armrests, feet, then the desk and monitor. Work through the sections below in order, and check the fit after each change.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

Sit in the chair with your feet flat on the floor and your thighs level, then set the seat height so your forearms rest level when you type. Set the backrest so it meets your back, set the armrests so your shoulders stay relaxed, and put a footrest under your feet if they dangle. Finish by moving the monitor so the top of the screen sits at eye level and the keyboard sits at elbow height.

Set the seat height

Start with the seat, because every other adjustment follows it. Sit down, plant your feet flat on the floor, and raise or lower the seat until your thighs sit level and your knees point straight ahead. If the seat will not go low enough, the desk may be too high for the chair; raise the chair to the right elbow height and add a footrest instead of hunching over the keyboard. The how to adjust an office chair guide walks through each lever and knob on a standard chair.

Set the backrest

With the seat height set, lean back and let the backrest meet your back. Adjust the tilt and the lumbar support until the curve of the chair fills the curve of your lower back without pushing you forward. Lock the tilt where it stays steady, and sit back against the support while you type instead of perching on the front edge of the seat. If the chair has no lumbar adjustment, a seat cushion can add shape behind you; see the seat cushion types guide for styles that fit a chair.

Set the armrests

Armrests should carry the weight of your arms without lifting your shoulders. Set them so your forearms rest level and your elbows hang close to your sides, then check that your shoulders stay down and relaxed while you type. If the armrests sit too high, your shoulders rise; if they sit too low, your arms hang with nothing under them. Chairs with armrests that move in and out or slide forward and back let you match the width of the keyboard; chairs without that range suit a narrower desk layout.

Support your feet

Feet that dangle pull the rest of the setup out of line, so give them a place to rest. A footrest under the desk keeps your feet flat when the seat sits high; the CasaZenith footrest (on Amazon) measures 13 inches long, 9.6 inches wide and 5 inches high, with a textured surface, rollers, a non-slip pad on the bottom and a snap-on design that needs no tools. Place it where your feet land without reaching, and move it with the chair when you shift position. A footrest also helps when the desk is fixed and the chair must stay high to reach the keyboard.

Line up the desk and monitor

Set the chair, then move the desk gear to meet it, not the other way round. The keyboard should sit at elbow height with your wrists straight, and the top of the monitor should sit at eye level so you look slightly down at the middle of the screen. If the desk is fixed at a height that leaves the keyboard too high, a keyboard tray drops the keys below the desktop; if the screen sits too low, a monitor arm or stand lifts it without changing the desk. The ergonomic monitor setup guide covers screen height and distance in detail, and the computer desk setup guide covers layout and accessories.

How to check your ergonomic office chair setup

Run through the setup in order and check each part before you move on. Seat height comes before the backrest, the backrest before the armrests, and the feet before the desk and monitor. Sit and type for a while, then stand and sit back down; if something has shifted, reset that part and check the parts around it. A chair that sinks during the day or a lever that slips needs a look at the mechanism; the office chair maintenance guide covers keeping a chair in shape, and the how to choose an ergonomic chair guide covers what to look for when the current chair cannot adjust far enough.

FAQ

How do I set up an ergonomic office chair?

Set the seat height so your feet rest flat and your thighs sit level, then set the backrest, armrests and footrest in that order. Finish by moving the keyboard to elbow height and the monitor so the top of the screen sits at eye level.

What should I do if my feet do not reach the floor?

Raise the chair only if the keyboard stays at elbow height, and add a footrest under the desk so your feet rest flat. The CasaZenith footrest measures 13 inches long, 9.6 inches wide and 5 inches high, with a non-slip pad on the bottom.

How do I know the armrests are set right?

Your forearms should rest level, your elbows should hang close to your sides, and your shoulders should stay down and relaxed while you type. If your shoulders rise, lower the armrests; if your arms hang with nothing under them, raise them.

Do I adjust the chair or the monitor?

Adjust the chair, then move the monitor and keyboard to meet it. Moving the screen before the chair is set means redoing the screen height after each chair change.

More for your workspace

See the how to choose an ergonomic chair, the office chair types, the ergonomic monitor setup and the standing desk setup guides.