Standing desk parts are the replaceable pieces that keep a height-adjustable desk moving: the power supply that feeds the motor, the motor kit that lifts the frame, and the controller that sets the height. Picture a desk that rises, then stops before it reaches the top, or a desk that will not move at all after a move across the room: the frame is fine, but a part has failed. This guide explains each part, how to match a replacement to the desk you own, and the gear that covers each job.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Most standing desk failures come down to a part, not the frame: the power supply, the motor, or the controller. Match a replacement power supply by voltage, current and plug shape, match a motor kit by drive size and thrust, and check the listing for the desk models it fits. The gear below covers each job, ranked by the scores the listings earn.
What standing desk parts do
A height-adjustable desk runs on parts that work together. The power supply turns wall power into the low-voltage power the motor needs: the supplies in this guide list 29V and 24V outputs, and the voltage has to match the desk. The motor kit lifts the frame, and its drive size and thrust decide which desks it fits: the kit in this guide lists a 6mm hexagon drive with an 8mm option and 100 kg thrust. The controller sets the height, holds the presets, and carries the buttons you press each day. When a desk stops moving, the fault sits in one of these parts, and the fix is a replacement part that matches the desk, not a new desk.
| Part | What it does | What to match | Amazon |
|---|---|---|---|
| Power supply | Feeds low-voltage power to the motor | Voltage, current and plug shape | |
| Motor kit | Lifts the frame up and down | Drive size and thrust | |
| Controller | Sets the height and holds presets | Fit with the motor kit |
Use the table to name the failed part, then match the replacement by the figures in the right-hand column. The sections below walk through each match in turn.
How to match a replacement power supply
Start with voltage. The desk lists a voltage, and the replacement has to match it: the Claiks supplies in this guide list 29V, while the motor kit in this guide runs on 24V, so a 29V supply does not belong on a 24V desk. Next comes current: the supplies here list 2A at 58W, and the replacement has to cover the draw the desk asks for. Then comes the plug: the Sopito supply (on Amazon) uses a 2-pin plug with one flat and one round pin, and the Claiks supplies fit the Claiks socket, so check the plug shape against the desk before you buy. Last comes the model fit: the HUZUM and solsinsy supplies fit Claiks P1.01.001 and P101001 desks in 40, 48, 55 and 63 in sizes and the YH-K290018-C model, while the Sopito supply lists a broad fit across recliners, lift chairs, electric sofas and standing desks. Check the listing for protection features too: the Claiks supplies state over-current, over-voltage and short-circuit protection with a fire-resistant material, and the Sopito supply states overheat, overvoltage, overcharge and overcurrent protection.
How to match a motor kit
A motor kit has more pieces to match than a power supply, so check each piece in turn. The drive has to fit the desk frame: the kit in this guide lists a 6mm hexagon drive with an 8mm option, and the listing states it fits most height-adjustable desks. The thrust has to cover the load: the kit lists 100 kg thrust. The controller has to work with the motor: the kit here comes as a 3-piece set with the motor, the controller and the power adapter, and the controller carries height presets, a sedentary reminder and a reset button. The kit runs on 24V, so it does not share parts with the 29V supplies in this guide. If the desk already has a motor that works, a power supply may be the fix; if the motor itself has failed, the kit is the part to replace. For the desk itself, see the best standing desks for working from home.
The gear
The gear below covers the matching steps above: the power supplies fit the voltage and plug checks, and the motor kit fits the drive and thrust checks.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | HUZUM 29V Claiks Supply | 9.7/10 | Buy on Amazon |
| 2 | Sopito RPS001 | 9.6/10 | Buy on Amazon |
| 3 | solsinsy 29V Claiks Supply | 9.6/10 | Buy on Amazon |
| 4 | Hzxcilg 24V Motor Kit | 9.4/10 | Buy on Amazon |

HUZUM 29V Claiks Supply
A 29V, 2A, 58W power supply that fits Claiks electric standing desks in 40, 48, 55 and 63 in sizes, with a 2 Year Manufacturer warranty.
Pros
- 29V, 2A, 58W output matches the Claiks YH-K290018-C supply it replaces
- Fits Claiks desks in 40, 48, 55 and 63 in sizes
- Over-charging, over-heating, over-current, over-voltage, short-circuit and over-discharger protection are stated
- 2 Year Manufacturer warranty is stated
Cons
- Only fits Claiks electric standing desks, not other brands
- No cord length is stated in the listing
- The model number appears in two forms, YH-K290018-C and YHK290018C
- Only one unit is included, with no spare cord
Detailed Review
HUZUM lists this supply as a switching mode power supply for Claiks electric standing desks, with an input of 100-240V AC at 50/60Hz and an output of 29V, 2A and 58W. It fits the Claiks P1.01.001 and P101001 desks in 40, 48, 55 and 63 in sizes and the YH-K290018-C model, and it states over-charging, over-heating, over-current, over-voltage, short-circuit and over-discharger protection with a fire-resistant material. The spec table gives a 4.0 by 2.0 by 1.5 in size, a 0.62 lb figure and a 2 Year Manufacturer warranty.
Who it's for: anyone with a Claiks electric standing desk whose original YH-K290018-C supply has failed and who wants the same output and protections. Who should skip it: anyone whose desk is not a Claiks, or who needs a stated cord length.
Its Office Score of 9.7/10 comes from performance 30/35, build 21/25, value 21/25, safety 8/10 and warranty 4/5: 84 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Output | 29V, 2A, 58W |
|---|---|
| Input | 100-240V AC, 50/60Hz |
| Fits | Claiks P1.01.001, 40, 48, 55, 63 in |
| Size | 4.0 by 2.0 by 1.5 in |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Over-charging, over-heating, over-current, over-voltage, short-circuit and over-discharger protection plus fire-resistant material are stated, so safety scores 8 of 10. 2 Year Manufacturer warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Sopito RPS001
A 29V, 2A, 58W power supply with a 2-pin plug and a 4ft cord, sold for recliners and listed as compatible with standing desks, with a 14-month warranty.
Pros
- 2-pin connection is stated as universal with most recliners, lift chairs and standing desks
- Overheat, overvoltage, overcharge and overcurrent protection are stated
- Includes a 4ft power cord with the adapter
- 14-month warranty is stated
Cons
- Sold as a recliner supply first, with standing desks as one of several fits
- The 2-pin plug has one flat and one round pin, so it fits only desks with that socket
- 14-month warranty is shorter than the two-year terms on the Claiks supplies
Detailed Review
Sopito lists this adapter as a 2-pin AC/DC power supply with an input of 100-240V, 2.5A-4A at 50/60Hz and an output of DC 29V, 2.0A and 58W. The listing states it fits most recliners, lift chairs, electric sofas and standing desks with a 2-pin connection, and it states overheat, overvoltage, overcharge and overcurrent protection. The set includes the adapter and a 4ft power cord. The spec table gives two size figures, 6.0 by 3.6 by 1.8 in and 4.58 by 2.32 by 1.46 in, so the listed size is uncertain, and the spec table states a 14-month warranty.
Who it's for: anyone who needs a 29V supply with a 2-pin plug and a cord included, for a recliner or a standing desk with that socket. Who should skip it: anyone whose desk needs a different plug, or who wants a two-year warranty term.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 21/25, safety 8/10 and warranty 3/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Output | DC 29V, 2.0A, 58W |
|---|---|
| Input | 100-240V, 2.5A-4A, 50/60Hz |
| Plug | 2-pin, one flat and one round |
| Cord | 4ft power cord included |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Overheat, overvoltage, overcharge and overcurrent protection are stated, so safety scores 8 of 10. 14-month warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

solsinsy 29V Claiks Supply
A 29V, 2A, 58W power supply for Claiks electric standing desks in 40, 48, 55 and 63 in sizes, with a two-year warranty in the bullets.
Pros
- 29V, 2A, 58W output matches the Claiks YH-K290018-C supply it replaces
- Fits Claiks desks in 40, 48, 55 and 63 in sizes
- Over-charging, over-heating, over-current, over-voltage, short-circuit and over-discharger protection are stated
- Two-year warranty is stated in the bullets
Cons
- Only fits Claiks electric standing desks, not other brands
- No cord length is stated in the listing
- Only one unit is included, with no spare cord
Detailed Review
solsinsy lists this supply as a switching mode power supply for Claiks electric standing desks, with an input of 100-240V AC at 50/60Hz and an output of 29V, 2A and 58W. It fits the Claiks P1.01.001 and P101001 desks in 40, 48, 55 and 63 in sizes and the YH-K290018-C model, and it states over-charging, over-heating, over-current, over-voltage, short-circuit and over-discharger protection with a fire-resistant material. The bullets state a two-year warranty, but the spec table states 1Year Warranty, so the term is unclear. The spec table lists 0.6 lb.
Who it's for: anyone with a Claiks electric standing desk who wants the same 29V output and protection set as the original supply. Who should skip it: anyone whose desk is not a Claiks, or who wants a clear warranty term with no contradiction.
Its Office Score of 9.6/10 comes from performance 30/35, build 20/25, value 20/25, safety 8/10 and warranty 0/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Output | 29V, 2A, 58W |
|---|---|
| Input | 100-240V AC, 50/60Hz |
| Fits | Claiks P1.01.001, 40, 48, 55, 63 in |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Over-charging, over-heating, over-current, over-voltage, short-circuit and over-discharger protection plus fire-resistant material are stated, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Hzxcilg 24V Motor Kit
A 24V electric desk motor kit with a 6mm hexagon drive, a manual controller with height presets, and 100 kg thrust, as a 3-piece set.
Pros
- Motor, controller and power adapter come as a complete 3-piece set
- 6mm hexagon drive fits most height-adjustable desks, with an 8mm option listed
- Controller has height presets, a sedentary reminder and a reset button
- 100 kg thrust is stated
Cons
- No warranty is stated in the listing
- No certifications or protection features are stated
- Runs on 24V, so it does not share parts with the 29V supplies in this guide
- Quiet operation is claimed with no stated noise figure
Detailed Review
Hzxcilg lists this kit as a 24V electric desk motor kit with a 6mm hexagon drive, an 8mm option, a manual controller and a 100 kg thrust. The set includes the motor, the standing desk controller and the power adapter, and the controller has height presets, a sedentary reminder and a reset button. The spec table gives a 6.69 by 2.75 by 1.57 in size and a 6MM size, and the listing states quiet, jerk-free operation with low no-load current. No warranty term and no certification are stated.
Who it's for: anyone building or fixing a height-adjustable desk who wants a motor, controller and adapter in one set with preset heights. Who should skip it: anyone who wants a warranty term in writing, or who needs a 29V part for a Claiks desk.
Its Office Score of 9.4/10 comes from performance 29/35, build 20/25, value 20/25, safety 0/10 and warranty 0/5: 69 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Drive | 6mm hexagon (8mm option listed) |
|---|---|
| Thrust | 100 kg |
| Voltage | 24V |
| Set | Motor, controller, power adapter |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. No anti-collision feature or safety listing is stated, so safety scores zero. No warranty term, so warranty scores zero. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
FAQ
What voltage power supply does a standing desk need?
The voltage has to match the desk: the Claiks supplies in this guide list 29V, and the motor kit in this guide runs on 24V. Check the desk manual or the label on the failed supply, and match the voltage, the current and the plug shape.
Can a recliner power supply work on a standing desk?
It can when the listing names standing desks and the figures match: the Sopito supply lists 29V, 2A and 58W with a 2-pin plug, and it names standing desks among its fits. Match the voltage, the current and the plug shape to the desk before you buy.
Which motor kit fits a standing desk?
Match the drive size, the thrust and the controller: the kit in this guide lists a 6mm hexagon drive with an 8mm option, 100 kg thrust, and a controller with height presets. Check the drive size against the desk frame, and check that the kit includes the motor, the controller and the power adapter.
Do standing desk parts carry a warranty?
Some do and some do not: the Sopito supply lists a 14-month warranty, the HUZUM supply (on Amazon) lists a 2 Year Manufacturer warranty, and the solsinsy supply (on Amazon) lists a two-year warranty in its bullets against 1Year Warranty in its spec table. The motor kit lists no warranty term. Check the listing for the term before you buy.
More for your workspace
See the best standing desks for working from home, the best office chairs for working from home, the best keyboard trays and the best under-desk footrests.









