Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Office Chairs

Office Chair Parts: Replacement Pieces Guide

Office chair parts explained: how to identify a worn gas cylinder, tilt mechanism or base, match the measurements, and replace the part instead of the chair.

Office Chair Parts: Replacement Pieces Guide

A chair that sinks by noon turns a morning video call into a slow slide toward the floor, and the culprit is often one worn part, not the whole chair. This guide explains office chair parts: the gas cylinder, the tilt mechanism, the base and the casters, how to tell which one wore out, and how to match the measurements before ordering a replacement.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer: office chair parts

An office chair has a small set of replaceable parts that carry the chair: a gas cylinder that sets the seat height, a tilt mechanism that joins the seat to the cylinder and controls lean, a base with arms that hold the casters, and the casters themselves. When a chair sinks on its own, the cylinder is the first part to check. When the seat wobbles or the tilt lever stops holding the lean, look at the mechanism. When an arm cracks or a caster drags, look at the base and the wheels. Match the measurements on the part you remove, since chair parts are not one-size-fits-all.

Step 1: Find the worn part

Start with the symptom. A seat that sinks under weight points to the gas cylinder, which is the pneumatic piston between the base and the seat. A seat that rocks side to side or a tilt lever that no longer holds the lean points to the tilt mechanism under the seat. A base arm that flexes or a caster that sticks points to the base set. The Office Oasis listing states its kits have helped repair 120,000+ office chairs since 2016, and a sinking seat is the repair those kits are built for, so check the cylinder first when height will not hold.

Step 2: Measure before ordering

Chair parts fit by measurement, not by chair brand. Measure the mounting holes under the seat: the Besitu mechanism (on Amazon) lists 6 in x 10.2 in mounting holes, the LISHINE mechanism lists 5.9 in x 10 in mounting holes, and the Frassie base (on Amazon) set lists 10 in x 6 in mounting hole spacing. Measure the cylinder shaft and column: the Office Oasis cylinder (on Amazon) lists a 1-1/8 in (28mm) diameter piston shaft and a 2 in (50mm) diameter column, with a 4.75 in (120mm) stroke. The Frassie cylinder lists a length of 278 mm, an extension length of 403 mm and a stroke of 125 mm (4.9 in). Write the figures down and compare them with the listing before ordering.

Reference listings at a glance

The listings below show the range of stated sizes and capacities for each part type. Use them to see which figures a listing should carry before you order.

Part Stated size Stated capacity Warranty
Office Oasis cylinder 4.75 in stroke; 1-1/8 in shaft Up to 1000 lbs Lifetime
Besitu tilt mechanism 6 in x 10.2 in mounting holes 500 lbs Not stated
Frassie base set 28 in base; 4.9 in stroke Not stated Not stated
LISHINE tilt mechanism 5.9 in x 10 in mounting holes 660 lbs Not stated

Read the listing closely: the LISHINE listing names 660 lbs in its title and 500 lbs in a bullet heading, so confirm the figure on the listing before ordering.

Step 3: Match the cylinder

Gas cylinders come in classes, and the class is named in the listing. The Office Oasis listing states its cylinders are Class 4, while the Frassie listing states a Class 3 cylinder. The Office Oasis cylinder lists support up to 1000 lbs, and its kit includes a purpose-built removal tool, step-by-step installation instructions and gloves. Check the stroke as well: the Office Oasis cylinder lists a 4.75 in (120mm) stroke and the Frassie cylinder lists a 125 mm (4.9 in) stroke, so the seat travel differs between them. A cylinder with the wrong shaft diameter will not seat in the mechanism, so match the 1-1/8 in (28mm) shaft and the 2 in (50mm) column against the part you remove.

Step 4: Match the tilt mechanism and base

The tilt mechanism is the steel plate under the seat that holds the cylinder and sets the lean. The Besitu mechanism lists a 0.12 in thick solid steel bracket, a tilt tension knob, and a single lever for gas lift height activation, and it accepts standard 28mm (1.1-Inch) tapered gas lift cylinders. It lists a 500 lbs capacity. The LISHINE mechanism lists a thickened steel plate and a reinforced retaining collar, and it lists support up to 660 lbs. The Frassie base set lists a 28 in steel base with 5 silent rubber casters and 5 bell glides, so the same set works as a rolling base or a fixed base. Check the mounting holes first, since the Besitu and LISHINE mechanisms list different hole spacing.

When to replace the chair instead

A single worn part is worth replacing, and the listings here cover the cylinder, the mechanism and the base. When the seat cushion has lost its shape and the frame shows cracks in more than one place, a new chair may cost less in time than chasing parts one by one. The office chair repair guide covers sinking seats, bases and tilt in more depth, and the best office chairs for working from home picks cover full replacements. If the chair still fits the desk and only one part has worn out, order the part and keep the chair.

FAQ

Why does my office chair keep sinking?

The gas cylinder holds the seat height, and a sinking seat points to the cylinder. A replacement cylinder kit with a removal tool, such as the Office Oasis kit, swaps the piston. Match the shaft and column measurements before ordering.

What size tilt mechanism do I need?

Measure the mounting holes under the seat. The Besitu mechanism lists 6 in x 10.2 in mounting holes, the LISHINE mechanism lists 5.9 in x 10 in mounting holes, and the Frassie base set lists 10 in x 6 in mounting hole spacing. Order the mechanism whose holes match your chair.

Are office chair cylinders universal?

Many cylinders follow the same industry standard size, and the Office Oasis listing states its cylinder will fit almost every office chair on the market. Check the shaft and column: the Office Oasis cylinder lists a 1-1/8 in (28mm) piston shaft and a 2 in (50mm) column. Measure your old cylinder before ordering.

How do I know which base fits my chair?

Match the base diameter and the mounting hole spacing. The Frassie base set lists a 28 in base with 10 in x 6 in mounting hole spacing, and it includes 5 casters and 5 bell glides. Compare those figures with your chair before ordering.

More for your workspace

See every office chairs guide and all seating guides. Also see the ball casters for desk chair picks and the office chair repair guide.

More picks: office chair mat for easy glide, footrest under desk, keyboard tray for desk and standing desk for working from home.